Masa's blog

_ Slackware64-current on LIFEBOOK AH Series

メインマシンをLIFEBOOK WA3/F3(中古 Core-i7 1195G7, Memory 32GB, M.2 SSD 1TB)に買い換えた機会にSlackware64-14.2からSlackware64-currentに変更した。

/etc/fstab

/dev/nvme0n1p2   swap             swap        defaults         0   0
/dev/nvme0n1p3   /                ext4        defaults,noatime 1   1
/dev/nvme0n1p1   /boot/efi        vfat        defaults         1   0
#/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro,comment=x-gvfs-show 0   0
/dev/fd0         /mnt/floppy      auto        noauto,owner     0   0
devpts           /dev/pts         devpts      gid=5,mode=620   0   0
proc             /proc            proc        defaults         0   0
tmpfs            /dev/shm         tmpfs       nosuid,nodev,noexec 0   0

gdisk -l /dev/nvme0n1

GPT fdisk (gdisk) version 1.0.10

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.
Disk /dev/nvme0n1: 1953525168 sectors, 931.5 GiB
Model: WD_BLACK SN770 1TB
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): BAB62137-FDB7-4CBF-B6B0-313F47EF3E72
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 3437 sectors (1.7 MiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1            2048          206847   100.0 MiB   EF00  EFI system partition
   2          206848        79898623   38.0 GiB    8200  Linux swap
   3        79898624      1953523711   893.4 GiB   8300  Linux filesystem

独自にインストールしたもの

• mew-6.9a.tar.gz(参考)
• nkf-2.1.5.tar.gz
• sf
  • kakasi-2.3.6.tar.xz
  • sf-0.6.tar.gz(Github)
• sendmail(参考)
  • sendmail-cf-8.18.1-noarch-1.txz
  • sendmail-8.18.1-config.tar.gz
  • sendmail-8.18.1-slackbuild.tar.gz
• clamav-1.3.1.tar.gz(参考)

How to build

tar xvf clamav-1.0.0.tar.gz
cd clamav-1.0.0
mkdir build
cd build
cmake ..
make

su
make install
mkdir /usr/local/share/clamav
chown clamav.clamav /usr/local/share/clamav
chmod 775 /usr/local/share/clamav

/etc/passwd

clamav:x:513:513:clamav anti virus:/usr/local/share/clamav:/bin/false

/etc/group

clamav:x:513:

/usr/local/etc/clamd.conf

##Example
DatabaseDirectory /usr/local/share/clamav
LocalSocket /tmp/clamd.socket
TCPSocket 3310
TCPAddr localhost

/usr/local/etc/freshclamd.conf

##Example
DatabaseDirectory /usr/local/share/clamav
##HTTPProxyServer 192.168.0.100
##HTTPProxyPort 8080

• マイナンバーカード利用(参考)
  • pcsc-lite-1.9.9-slackbuild.tar.gz
  • pcsc-tools-1.5.8-slackbuild.tar.gz
  • pcsc-perl-1.4.14-slackbuild.tar.gz
  • opensc-0.23.0-slackbuild.tar.gz
  • ccid-1.4.36-slackbuild.tar.gz
• libdvdcss-1.4.3-slackbuild.tar.gz(参考) for vmplayer
• xengine-1.11.tar.gz(参考)
• LibreOffice(参考)
  • LibreOffice_7.6.6_Linux_x86-64_rpm_langpack_ja.tar.gz
  • LibreOffice_7.6.6_Linux_x86-64_rpm_helppack_ja.tar.gz
  • LibreOffice_7.6.6_Linux_x86-64_rpm.tar.gz
• IPAfont00303.zip
• kouzanmouhitufont.zip(参考)
• dynafont-unicode.tar.gz(参考1, 参考2)
• Brother dcpj552n with CUPS(参考)
  • a2ps.pl-1.45-utf8.tar.gz(参考)

filterdcpj552n

*** /opt/brother/Printers/dcpj552n/lpd/filterdcpj552n.ORG	2024-05-03 23:29:12.182264882 +0900
--- /opt/brother/Printers/dcpj552n/lpd/filterdcpj552n	2024-08-11 09:09:08.931587840 +0900
***************
*** 77,84 ****
  		rm -f $PS_TEMP
  		;;
  	* )
! 		A2PS_OP="--output=- -q -1 --no-header --borders no"
! 		eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
  		RET=$?
  		;;
  esac
--- 77,87 ----
  		rm -f $PS_TEMP
  		;;
  	* )
! ##		A2PS_OP="--output=- -q -1 --no-header --borders no"
! ##		eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
! 		A2PS_OP=""
! ####		eval cat $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
! 		eval /usr/local/bin/nkf -w $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
  		RET=$?
  		;;
  esac

• • aaa_glibc-solibs-2.39-i586-2.txz

tar xvf aaa_glibc-solibs-2.39-i586-2.txz lib/incoming/ld-2.39.so lib/incoming/libc-2.39.so lib/incoming/libm-2.39.so
cp lib/incoming/lib*so /lib/
ldconfig

• • dcpj552nlpr-3.0.0-1.i386.rpm
  • dcpj552ncupswrapper-3.0.0-1.i386.rpm
  • dcpj552n_cupswrapper_GPL_source_3.0.0-1.tar.gz
• Brother dcpj552n with xsane(参考)
  • brscan4-0.4.9-1.x86_64.rpm
  • brscan-skey-0.3.2-0.x86_64.rpm
  • brother-udev-rule-type1-1.0.2-0.noarch.rpm

/opt/brother/Printers/dcpj552n/cupswrapper/cupswrapperdcpj552n -i
mkdir /var/spool/lpd

http://localhost:631/admin/
 -> 管理
 -> プリンターの追加
 -> LPD/LPR ホストまたはプリンター
 -> lpd://192.168.0.100/lpraw
 -> 名前、説明、場所
 -> または PPD ファイルを提供: /opt/brother/Printers/dcpj552n/cupswrapper/brother_dcpj552n_printer_en.ppd
 -> プリンターの追加

• TiMidity++(参考)
  • fluid-soundfont-3.1_5-slackbuild.tar.gz
  • eawpats-12-slackbuild.tar.gz
  • freepats-20060219-slackbuild.tar.gz
  • TiMidity++-2.15.0-slackbuild.tar.gz
• zbar-0.23.90-slackbuild.tar.gz(参考)
• fswebcam-20110717.tar.gz(参考)
• audacity
  • portmidi-2.0.2-slackbuild.tar.gz
  • soxr-0.1.3-slackbuild.tar.gz
  • rapidjson-1.1.0-slackbuild.tar.gz
  • serd-0.30.16-slackbuild.tar.gz
  • sord-0.16.14-slackbuild.tar.gz
  • lv2-1.18.10-slackbuild.tar.gz
  • suil-0.10.18-slackbuild.tar.gz
  • sratom-0.6.14-slackbuild.tar.gz
  • python3-flit_core-3.9.0-slackbuild.tar.gz
  • python3-installer-0.7.0-slackbuild.tar.gz
  • python3-pyproject-hooks-1.0.0-slackbuild.tar.gz
  • python3-build-1.2.1-slackbuild.tar.gz
  • python3-wheel-0.43.0-slackbuild.tar.gz
  • python3-pyproject-metadata-0.8.0-slackbuild.tar.gz
  • python3-meson-opt-1.4.0-slackbuild.tar.gz
  • python3-mesonpy-0.15.0-slackbuild.tar.gz
  • python3-numpy-1.26.3-slackbuild.tar.gz
  • lilv-0.24.20-slackbuild.tar.gz
  • portaudio-19.7.0-slackbuild.tar.gz
  • wxWidgets-3.2.4.1-slackbuild.tar.gz
  • libsbsms-20220812_e6c9c3b-slackbuild.tar.gz
  • portsmf-234-slackbuild.tar.gz
  • audacity-3.5.1-slackbuild.tar.gz
• openshot
  • zeromq-4.3.5-slackbuild.tar.gz
  • python3-setuptools-opt-69.5.1-slackbuild.tar.gz
  • python3-pyzmq-25.1.2-slackbuild.tar.gz
  • python3-httplib2-0.22.0-slackbuild.tar.gz
  • unittest-cpp-2.0.0-slackbuild.tar.gz
  • libopenshot-audio-0.3.2-slackbuild.tar.gz
  • cppzmq-4.10.0-slackbuild.tar.gz
  • libopenshot-0.3.2-slackbuild.tar.gz
  • openshot-3.1.1-slackbuild.tar.gz
• dvdstyler
  • libavc1394-0.5.4-slackbuild.tar.gz
  • libmspack-0.10.1alpha-slackbuild.tar.gz
  • faad2-2.10.1-slackbuild.tar.gz
  • libquicktime-1.2.4-slackbuild.tar.gz
  • wxsvg-1.5.24-slackbuild.tar.gz
  • mjpegtools-2.2.1-slackbuild.tar.gz
  • mpgtx-1.3.1-slackbuild.tar.gz
  • dvdstyler-3.3b3-slackbuild.tar.gz
• vlc
  • opencore-amr-0.1.6-slackbuild.tar.gz
  • libupnp-1.14.12-slackbuild.tar.gz
  • vlc-3.0.20-slackbuild.tar.gz
• VMware-Workstation-Full-17.5.2-23775571.x86_64.bundle(参考)

# sh VMware-Workstation-Full-17.5.2-23775571.x86_64.bundle --ignore-errors

## https://bbs.archlinux.org/viewtopic.php?pid=1992431
$ git clone -b workstation-17.5.1 https://github.com/mkubecek/vmware-host-modules.git
$ cd vmware-host-modules/
$ make
# make install
# /etc/init.d/vmware restart

*** ./root/vmware-host-modules/vmnet-only/vmnetInt.h.ORG	2024-05-16 21:39:10.539013690 +0900
--- ./root/vmware-host-modules/vmnet-only/vmnetInt.h	2024-05-16 21:43:04.991016552 +0900
***************
*** 41,48 ****
      compat_skb_set_network_header(skb, sizeof (struct ethhdr)),  \
      dev_queue_xmit(skb)                                   \
    )
! #define dev_lock_list()    read_lock(&dev_base_lock)
! #define dev_unlock_list()  read_unlock(&dev_base_lock)


  extern struct proto vmnet_proto;
--- 41,53 ----
      compat_skb_set_network_header(skb, sizeof (struct ethhdr)),  \
      dev_queue_xmit(skb)                                   \
    )
! #if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 9, 0)
! #    define dev_lock_list()    rcu_read_lock()
! #    define dev_unlock_list()  rcu_read_unlock()
! #else
! #    define dev_lock_list()    read_lock(&dev_base_lock)
! #    define dev_unlock_list()  read_unlock(&dev_base_lock)
! #endif


  extern struct proto vmnet_proto;

*** ./vmware-host-modules/vmmon-only/include/iocontrols.h.ORG	2024-05-14 22:39:47.000000000 +0900
--- ./vmware-host-modules/vmmon-only/include/iocontrols.h	2024-09-08 01:01:50.244040200 +0900
***************
*** 146,152 ****
   * the NT specific VMX86_DRIVER_VERSION.
   */

! #define VMMON_VERSION           (416 << 16 | 0)
  #define VMMON_VERSION_MAJOR(v)  ((uint32) (v) >> 16)
  #define VMMON_VERSION_MINOR(v)  ((uint16) (v))

--- 146,152 ----
   * the NT specific VMX86_DRIVER_VERSION.
   */

! #define VMMON_VERSION           (417 << 16 | 0)
  #define VMMON_VERSION_MAJOR(v)  ((uint32) (v) >> 16)
  #define VMMON_VERSION_MINOR(v)  ((uint16) (v))

# cd /etc/rc.d/rc4.d
# ln -s /etc/rc.d/init.d/vmware K08vmware
# ln -s /etc/rc.d/init.d/vmware-USBArbitrator K08vmware-USBArbitrator
# ln -s /etc/rc.d/init.d/vmware S19vmware
# ln -s /etc/rc.d/init.d/vmware-USBArbitrator S50vmware-USBArbitrator

$ /usr/libexec/polkit-gnome-authentication-agent-1 &
$ vmplayer

You can use /usr/lib/vmware/bin/vmware-netcfg for nettwork setting
 o vmnet1 for Hostonly network
 o vmnet8 for Nat network

• downloadhelper(参考)

$ curl -sSLf https://github.com/aclap-dev/vdhcoapp/releases/latest/download/install.sh | bash

• guvcview-2.1.0-slackbuild.tar.gz
• mjpg-streamer-1.0.0.tar.gz
• FD-3.01j.tar.gz
• d88split-2.zip
• ipamjm00501.tar.gz
• makefontscale.sh

#! /bin/sh
#
# mfs fontfile fndry fmly cp
#
# cd /usr/share/fonts/TTF
# cp fonts.scale fonts.scale.backup
# cp fonts.dir fonts.dir.backup
# /home/m-ito/INSTALLED/makefontscale.sh >fonts.add
# cat fonts.scale.backup | egrep -v 'dfjgyomd.ttf|dfjkaibd.ttf|dfjkailt.ttf|dfjkaimd.ttf|dfjktrxb.ttf|dfjleimd.ttf|dfjmrgbd.ttf|dfjmrglt.ttf|dfjmrgmd.ttf|dfjmrmmd.ttf|dfjmrmw7.ttf|dfjmrmw9.ttf|dfjpop1.ttf|dfjpopw5.ttf|dfjpopw9.ttf|dfjgyomd-unicode.ttf|dfjkaibd-unicode.ttf|dfjkailt-unicode.ttf|dfjkaimd-unicode.ttf|dfjktrxb-unicode.ttf|dfjleimd-unicode.ttf|dfjmrgbd-unicode.ttf|dfjmrgbd-unicode.ttf|dfjmrglt-unicode.ttf|dfjmrgmd-unicode.ttf|dfjmrmmd-unicode.ttf|dfjmrmw7-unicode.ttf|dfjmrmw9-unicode.ttf|dfjpop1-unicode.ttf|dfjpopw5-unicode.ttf|dfjpopw9-unicode.ttf|kochi-gothic.ttf|kochi-mincho.ttf|kouzanmouhitu.ttf|sazanami-gothic.ttf|sazanami-mincho.ttf|ipag.ttf|ipagp.ttf|ipam.ttf|ipamp.ttf|ipamjm.ttf' >junk
# cat junk fonts.add | sort | uniq >fonts.scale
# rm junk
# wc -l fonts.scale # remember LINE
# vim fonts.scale # edit number in first line to (LINE - 1)
# mkfontdir -e /usr/share/fonts/encodings -e /usr/share/fonts/encodings/large
# cp fonts.dir fonts.scale
# fc-cache -f -v
#
# JISX0208-1978, 1983, 1990, 1997, 2012
# JISX0213-2000, 2004, 2012
#
function mfs() {
	fontfile="$1"
	fndry="$2"
	fmly="$3"
	cp="$4"
	jisx="$5"

	for i in iso8859-1 jisx0201.1976-0 ${jisx}
	do
		bw=""
		colon=""
		if [ $i = "iso8859-1" -o $i = "jisx0201.1976-0" ]
		then
			bw="bw=0.5"
			colon=":"
		fi
		echo ${bw}${colon}${fontfile} -${fndry}-${fmly}-medium-r-normal--0-0-0-0-${cp}-0-$i
		echo ai=0.4:${bw}${colon}${fontfile} -${fndry}-${fmly}-medium-i-normal--0-0-0-0-${cp}-0-$i
		echo ai=0.2:${bw}${colon}${fontfile} -${fndry}-${fmly}-medium-o-normal--0-0-0-0-${cp}-0-$i
		echo ds=y:${bw}${colon}${fontfile} -${fndry}-${fmly}-bold-r-normal--0-0-0-0-${cp}-0-$i
		echo ds=y:ai=0.4:${bw}${colon}${fontfile} -${fndry}-${fmly}-bold-i-normal--0-0-0-0-${cp}-0-$i
		echo ds=y:ai=0.2:${bw}${colon}${fontfile} -${fndry}-${fmly}-bold-o-normal--0-0-0-0-${cp}-0-$i
	done
}

# jisx0208.1983-0
mfs dfjgyomd.ttf dynalab "dfgyosho lt" m jisx0208.1983-0
mfs dfjkaibd.ttf dynalab "dfkaisho xb" m jisx0208.1983-0
mfs dfjkailt.ttf dynalab "dfkaisho lt" m jisx0208.1983-0
mfs dfjkaimd.ttf dynalab "dfkaisho md" m jisx0208.1983-0
mfs dfjktrxb.ttf dynalab "dfkanteiryu xb" m jisx0208.1983-0
mfs dfjleimd.ttf dynalab "dfleisho sb" m jisx0208.1983-0
mfs dfjmrgbd.ttf dynalab "dfmarugothic bd" m jisx0208.1983-0
mfs dfjmrglt.ttf dynalab "dfmarugothic lt" m jisx0208.1983-0
mfs dfjmrgmd.ttf dynalab "dfmarugothic md" m jisx0208.1983-0
mfs dfjmrmmd.ttf dynalab "dfmarumoji sl" m jisx0208.1983-0
mfs dfjmrmw7.ttf dynalab "dfmarumoji w7" m jisx0208.1983-0
mfs dfjmrmw9.ttf dynalab "dfmarumoji w9" m jisx0208.1983-0
mfs dfjpop1.ttf dynalab "dfpop1 sb" m jisx0208.1983-0
mfs dfjpopw5.ttf dynalab "dfpop1 w5" m jisx0208.1983-0
mfs dfjpopw9.ttf dynalab "dfpop1 w9" m jisx0208.1983-0

# jisx0208.1983-0
mfs dfjgyomd-unicode.ttf dynalab "dfgyosho-u lt" m jisx0208.1983-0
mfs dfjkaibd-unicode.ttf dynalab "dfkaisho-u xb" m jisx0208.1983-0
mfs dfjkailt-unicode.ttf dynalab "dfkaisho-u lt" m jisx0208.1983-0
mfs dfjkaimd-unicode.ttf dynalab "dfkaisho-u md" m jisx0208.1983-0
mfs dfjktrxb-unicode.ttf dynalab "dfkanteiryu-u xb" m jisx0208.1983-0
mfs dfjleimd-unicode.ttf dynalab "dfleisho-u sb" m jisx0208.1983-0
mfs dfjmrgbd-unicode.ttf dynalab "dfmarugothic-u bd" m jisx0208.1983-0
mfs dfjmrglt-unicode.ttf dynalab "dfmarugothic-u lt" m jisx0208.1983-0
mfs dfjmrgmd-unicode.ttf dynalab "dfmarugothic-u md" m jisx0208.1983-0
mfs dfjmrmmd-unicode.ttf dynalab "dfmarumoji-u sl" m jisx0208.1983-0
mfs dfjmrmw7-unicode.ttf dynalab "dfmarumoji-u w7" m jisx0208.1983-0
mfs dfjmrmw9-unicode.ttf dynalab "dfmarumoji-u w9" m jisx0208.1983-0
mfs dfjpop1-unicode.ttf dynalab "dfpop1-u sb" m jisx0208.1983-0
mfs dfjpopw5-unicode.ttf dynalab "dfpop1-u w5" m jisx0208.1983-0
mfs dfjpopw9-unicode.ttf dynalab "dfpop1-u w9" m jisx0208.1983-0

# jisx0208.1983-0
mfs kochi-gothic.ttf misc "kochi gothic" m jisx0208.1983-0
mfs kochi-mincho.ttf misc "kochi mincho" m jisx0208.1983-0

# jisx0208.1983-0
mfs kouzanmouhitu.ttf misc kouzanbrushfont m jisx0208.1983-0

# jisx0208.1983-0
mfs sazanami-gothic.ttf misc "sazanami gothic" m jisx0208.1983-0
mfs sazanami-mincho.ttf misc "sazanami mincho" m jisx0208.1983-0

# jisx0208.1983-0
#mfs ipag.ttf misc ipagothic m jisx0208.1983-0
#mfs ipagp.ttf misc ipapgothic p jisx0208.1983-0
#mfs ipam.ttf misc ipamincho m jisx0208.1983-0
#mfs ipamp.ttf misc ipapmincho p jisx0208.1983-0
mfs ipag.ttf misc ipagothic m jisx0213.2004-0
mfs ipagp.ttf misc ipapgothic p jisx0213.2004-0
mfs ipam.ttf misc ipamincho m jisx0213.2004-0
mfs ipamp.ttf misc ipapmincho p jisx0213.2004-0

# jisx0208.1983-0
#mfs ipamjm.ttf misc ipapmjmincho m jisx0208.1983-0
mfs ipamjm.ttf misc ipapmjmincho m jisx0213.2004-0

• dvdbackup
  • libmpeg2-0.5.1-slackbuild.tar.gz
  • dvdbackup-0.4.2-slackbouild.tar.gz
• vcdimager-2.0.1-slackbuild.tar.gz
• fontforge
  • libspiro-20221101-slackbuild.tar.gz
  • libuninameslist-20240524-slackbuild.tar.gz
  • fontforge-20230101-slackbuild.tar.gz
• less-382-iso262.tar.gz

tar xvvf less-382.tar.gz
chmod -R +w less-382
cd less-382
zcat ../less-382-iso258.patch.gz | patch -p1
zcat ../less-382-iso258-259.patch.gz | patch -p1
zcat ../less-382-iso259-260.patch.gz | patch -p1
zcat ../less-382-iso260-261.patch.gz | patch -p1
zcat ../less-382-iso261-262.patch.gz | patch -p1
##zcat ../less-382-iso262.ext02.patch.gz | patch -p1
zcat ../less-382-iso262.ext03.patch.gz | patch -p1
CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=implicit-int" ./configure
CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=implicit-int" make
CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=implicit-int" make install

• Canna37p3.tar.bz2

Canna37p3.diff

*** Makefile.ORG	2024-07-12 23:12:36.912950194 +0900
--- Makefile	2024-07-12 23:14:29.256951565 +0900
***************
*** 290,296 ****

        PROJECTROOT = /usr

!       CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing
          CCOPTIONS =

        ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
--- 290,296 ----

        PROJECTROOT = /usr

!       CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing -Wno-error=implicit-int -Wno-error=implicit-function-declaration -Wno-error=incompatible-pointer-types
          CCOPTIONS =

        ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)

How to build

$ xmkmf -a
$ patch -p0 <../Canna37p3.diff
$ make canna
$ su
# make install
# make install.man

/etc/rc.d/rc.local

if [ -x /usr/local/canna/sbin/cannaserver ]
then
        rm /tmp/.iroha_unix/IROHA
        /usr/local/canna/sbin/cannaserver -inet -u bin
        echo "Starting cannaserver."
fi

/var/log/CANNA0msgs

touch /var/log/CANNA0msgs
chown bin.bin /var/log/CANNA0msgs

/etc/ld.so.conf

/usr/local/canna/lib

• kinput2-v3.1.tar.gz

kinput-v3.1.diff

*** Makefile.ORG	2024-07-12 23:38:49.433969389 +0900
--- Makefile	2024-07-12 23:42:59.724972445 +0900
***************
*** 169,175 ****

             CXXLIB = -lstdc++

!     CXXDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing
  CXXDEPENDINCLUDES =
   CXXEXTRA_DEFINES =
  CXXEXTRA_INCLUDES =
--- 169,175 ----

             CXXLIB = -lstdc++

!     CXXDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing -Wno-error=implicit-function-declaration -Wno-error=implicit-int
  CXXDEPENDINCLUDES =
   CXXEXTRA_DEFINES =
  CXXEXTRA_INCLUDES =
***************
*** 290,296 ****

        PROJECTROOT = /usr

!       CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing
          CCOPTIONS =

        ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
--- 290,296 ----

        PROJECTROOT = /usr

!       CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing -Wno-error=implicit-function-declaration -Wno-error=implicit-int
          CCOPTIONS =

        ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)

How to build

$ xmkmf -a
$ patch -p0 <../kinput-v3.1.diff
$ make
# make install
# make install.man

/usr/X11R6/lib/X11/app-defaults/Kinput2 like following.

*IMProtocol.locales: ja_JP.UTF-8, ja_JP.SJIS, ja_JP.EUC, ja_JP, japanese, japan, ja

~/.xinitrc

kinput2 -kinput +ximp -xim -canna &

• pefnac-0.5.2.tar.gz(Github)
• yt-dlp-2024.07.09.tar.gz

*** Makefile.ORG	2024-07-13 19:03:29.710096163 +0900
--- Makefile	2024-07-13 19:09:10.727100326 +0900
***************
*** 9,16 ****
  # Keep this list in sync with pyproject.toml includes/artifacts
  # intended use: when building a source distribution,
  # make pypi-files && python3 -m build -sn .
! pypi-files: AUTHORS Changelog.md LICENSE README.md README.txt supportedsites \
!             completions yt-dlp.1 pyproject.toml setup.cfg devscripts/* test/*

  .PHONY: all clean clean-all clean-test clean-dist clean-cache \
          completions completion-bash completion-fish completion-zsh \
--- 9,18 ----
  # Keep this list in sync with pyproject.toml includes/artifacts
  # intended use: when building a source distribution,
  # make pypi-files && python3 -m build -sn .
! #pypi-files: AUTHORS Changelog.md LICENSE README.md README.txt supportedsites \
! #            completions yt-dlp.1 pyproject.toml setup.cfg devscripts/* test/*
! pypi-files: AUTHORS Changelog.md LICENSE README.md            supportedsites \
!             completions          pyproject.toml setup.cfg devscripts/* test/*

  .PHONY: all clean clean-all clean-test clean-dist clean-cache \
          completions completion-bash completion-fish completion-zsh \
***************
*** 50,60 ****
  MARKDOWN != $(MARKDOWN_CMD)
  MARKDOWN ?= $(shell $(MARKDOWN_CMD))

! install: lazy-extractors yt-dlp yt-dlp.1 completions
  	mkdir -p $(DESTDIR)$(BINDIR)
  	install -m755 yt-dlp $(DESTDIR)$(BINDIR)/yt-dlp
! 	mkdir -p $(DESTDIR)$(MANDIR)/man1
! 	install -m644 yt-dlp.1 $(DESTDIR)$(MANDIR)/man1/yt-dlp.1
  	mkdir -p $(DESTDIR)$(SHAREDIR)/bash-completion/completions
  	install -m644 completions/bash/yt-dlp $(DESTDIR)$(SHAREDIR)/bash-completion/completions/yt-dlp
  	mkdir -p $(DESTDIR)$(SHAREDIR)/zsh/site-functions
--- 52,63 ----
  MARKDOWN != $(MARKDOWN_CMD)
  MARKDOWN ?= $(shell $(MARKDOWN_CMD))

! #install: lazy-extractors yt-dlp yt-dlp.1 completions
! install: lazy-extractors yt-dlp          completions
  	mkdir -p $(DESTDIR)$(BINDIR)
  	install -m755 yt-dlp $(DESTDIR)$(BINDIR)/yt-dlp
! #	mkdir -p $(DESTDIR)$(MANDIR)/man1
! #	install -m644 yt-dlp.1 $(DESTDIR)$(MANDIR)/man1/yt-dlp.1
  	mkdir -p $(DESTDIR)$(SHAREDIR)/bash-completion/completions
  	install -m644 completions/bash/yt-dlp $(DESTDIR)$(SHAREDIR)/bash-completion/completions/yt-dlp
  	mkdir -p $(DESTDIR)$(SHAREDIR)/zsh/site-functions

• google-chrome-stable_current_x86_64.rpm(参考)
• w3m-0.5.3.tar.gz

*** ./istream.h.ORG	2012-11-28 12:23:44.903821617 +0900
--- ./istream.h	2012-11-28 12:24:31.368727065 +0900
***************
*** 20,26 ****

  typedef struct stream_buffer *StreamBuffer;

! struct file_handle {
      FILE *f;
      void (*close) ();
  };
--- 20,26 ----

  typedef struct stream_buffer *StreamBuffer;

! struct File_handle {
      FILE *f;
      void (*close) ();
  };
***************
*** 53,59 ****

  struct file_stream {
      struct stream_buffer stream;
!     struct file_handle *handle;
      char type;
      char iseos;
      int (*read) ();
--- 53,59 ----

  struct file_stream {
      struct stream_buffer stream;
!     struct File_handle *handle;
      char type;
      char iseos;
      int (*read) ();
*** ./istream.c.ORG	2012-11-28 12:23:39.465130387 +0900
--- ./istream.c	2012-11-28 12:24:16.455831711 +0900
***************
*** 22,29 ****
  static void basic_close(int *handle);
  static int basic_read(int *handle, char *buf, int len);

! static void file_close(struct file_handle *handle);
! static int file_read(struct file_handle *handle, char *buf, int len);

  static int str_read(Str handle, char *buf, int len);

--- 22,29 ----
  static void basic_close(int *handle);
  static int basic_read(int *handle, char *buf, int len);

! static void file_close(struct File_handle *handle);
! static int file_read(struct File_handle *handle, char *buf, int len);

  static int str_read(Str handle, char *buf, int len);

***************
*** 114,120 ****
      stream = New(union input_stream);
      init_base_stream(&stream->base, STREAM_BUF_SIZE);
      stream->file.type = IST_FILE;
!     stream->file.handle = New(struct file_handle);
      stream->file.handle->f = f;
      if (closep)
  	stream->file.handle->close = closep;
--- 114,120 ----
      stream = New(union input_stream);
      init_base_stream(&stream->base, STREAM_BUF_SIZE);
      stream->file.type = IST_FILE;
!     stream->file.handle = New(struct File_handle);
      stream->file.handle->f = f;
      if (closep)
  	stream->file.handle->close = closep;
***************
*** 638,650 ****
  }

  static void
! file_close(struct file_handle *handle)
  {
      handle->close(handle->f);
  }

  static int
! file_read(struct file_handle *handle, char *buf, int len)
  {
      return fread(buf, 1, len, handle->f);
  }
--- 638,650 ----
  }

  static void
! file_close(struct File_handle *handle)
  {
      handle->close(handle->f);
  }

  static int
! file_read(struct File_handle *handle, char *buf, int len)
  {
      return fread(buf, 1, len, handle->f);
  }
*** ./main.c.ORG	2016-08-01 21:43:32.714706108 +0900
--- ./main.c	2016-08-01 21:45:27.569705061 +0900
***************
*** 833,839 ****
--- 833,844 ----
      mySignal(SIGPIPE, SigPipe);
  #endif

+ #if 0
      orig_GC_warn_proc = GC_set_warn_proc(wrap_GC_warn_proc);
+ #else
+     orig_GC_warn_proc = GC_get_warn_proc();
+     GC_set_warn_proc(wrap_GC_warn_proc);
+ #endif
      err_msg = Strnew();
      if (load_argc == 0) {
  	/* no URL specified */
*** ./url.c.ORG	2023-01-08 23:11:48.763189100 +0900
--- ./url.c	2023-01-08 23:12:29.258188644 +0900
***************
*** 268,277 ****
--- 268,279 ----
      if (RAND_status())
  	return;
      if ((file = RAND_file_name(buffer, sizeof(buffer)))) {
+ #if 0
  #ifdef USE_EGD
  	if (RAND_egd(file) > 0)
  	    return;
  #endif
+ #endif
  	RAND_load_file(file, -1);
      }
      if (RAND_status())

How to build

CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=incompatible-pointer-types" ./configure --disable-mouse && make

• realesrgan-ncnn-vulkan-20220424-ubuntu.zip

realesrgan-ncnn-vulkanを利用した動画の変換スクリプト

#! /bin/sh
input="$1"
output="$2"
fps=`ffmpeg -i ${input} 2>&1 | egrep 'Stream.*Video' | sed -e 's/^.* \([0-9\.][0-9\.]*\) fps.*$/\1/'`

rm -f tmp_frames/frame*.jpg
rm -f out_frames/frame*.jpg

ffmpeg -i ${input} -qscale:v 1 -qmin 1 -qmax 1 -vsync 0 tmp_frames/frame%08d.jpg

./realesrgan-ncnn-vulkan -i tmp_frames -o out_frames -n realesr-animevideov3 -s 2 -f jpg
#./realesrgan-ncnn-vulkan -i tmp_frames -o out_frames -n realesrgan-x4plus -s 4 -f jpg

ffmpeg -framerate ${fps} -i out_frames/frame%08d.jpg -i ${input} -map 0:v:0 -map 1:a:0 -c:a copy -c:v libx264 -r ${fps} -pix_fmt yuv420p ${output}

rm -f tmp_frames/frame*.jpg
rm -f out_frames/frame*.jpg

• ffmpeg(libx264とlibfdk-aacを有効にする)
  • x264-git_20210613_5db6aa6c-slackbuild.tar.gz
  • faac-1.30-slackbuild.tar.gz
  • libfdk-aac-2.0.3-slackbuild.tar.gz
  • ffmpeg-7.0.2-slackbuild.tar.gz

*** ffmpeg.SlackBuild.ORG	2024-08-04 23:00:00.000000000 +0900
--- ffmpeg.SlackBuild	2024-08-04 23:10:38.000000000 +0900
***************
*** 106,112 ****
  libglslang="" ; [ "${GLSLANG:-no}" != "no" ]      && libglslang="--enable-libglslang"
  shaderc=""    ; [ "${SHADERC:-yes}" != "no" ]     && libshaderc="--enable-libshaderc"

! libx264=""    ; [ "${X264:-no}" != "no" ]         && libx264="--enable-libx264"
  libcelt=""    ; [ "${CELT:-no}" != "no" ]         && libcelt="--enable-libcelt"
  libdc1394=""  ; [ "${DC1394:-no}" != "no" ]       && libdc1394="--enable-libdc1394"
  libgsm=""     ; [ "${GSM:-no}" != "no" ]          && libgsm="--enable-libgsm"
--- 106,112 ----
  libglslang="" ; [ "${GLSLANG:-no}" != "no" ]      && libglslang="--enable-libglslang"
  shaderc=""    ; [ "${SHADERC:-yes}" != "no" ]     && libshaderc="--enable-libshaderc"

! libx264=""    ; [ "${X264:-yes}" != "no" ]         && libx264="--enable-libx264"
  libcelt=""    ; [ "${CELT:-no}" != "no" ]         && libcelt="--enable-libcelt"
  libdc1394=""  ; [ "${DC1394:-no}" != "no" ]       && libdc1394="--enable-libdc1394"
  libgsm=""     ; [ "${GSM:-no}" != "no" ]          && libgsm="--enable-libgsm"
***************
*** 136,142 ****
  vapoursynth=""  ; [ "${VAPOURSYNTH:-no}" != "no" ] && vapoursynth="--enable-vapoursynth"
  opencore_amr="" ; [ "${OPENCORE:-no}" != "no" ] && \
    opencore_amr="--enable-libopencore-amrnb --enable-libopencore-amrwb"
! fdk=""          ; [ "${FDK_AAC:-no}" != "no" ]  && \
    { fdk="--enable-libfdk-aac"; non_free="--enable-nonfree" ; }
  decklink=""   ; [ "${DECKLINK:-no}" != "no" ]   && \
    { decklink="--enable-decklink" ; \
--- 136,142 ----
  vapoursynth=""  ; [ "${VAPOURSYNTH:-no}" != "no" ] && vapoursynth="--enable-vapoursynth"
  opencore_amr="" ; [ "${OPENCORE:-no}" != "no" ] && \
    opencore_amr="--enable-libopencore-amrnb --enable-libopencore-amrwb"
! fdk=""          ; [ "${FDK_AAC:-yes}" != "no" ]  && \
    { fdk="--enable-libfdk-aac"; non_free="--enable-nonfree" ; }
  decklink=""   ; [ "${DECKLINK:-no}" != "no" ]   && \
    { decklink="--enable-decklink" ; \

• audapolis-linux-x86_64-0.3.0_4.rpm
• ReazonSpeech(参考)

$ python3 -m venv venv
$ source venv/bin/activate
$ pip install --upgrade pip
$ pip install Cython
$ pip install wheel
$ git clone https://github.com/reazon-research/ReazonSpeech
$ pip install ReazonSpeech/pkg/nemo-asr
$ pip uninstall huggingface_hub
$ pip install huggingface-hub==0.23.2
$ pip uninstall numpy
$ pip install numpy==1.26.4

$ reazonspeech-nemo-asr HogeHoge.mp3

システム設定

/opt/brother/scanner/brscan4/brsanenetdevice4.cfg

*** ./opt/brother/scanner/brscan4/brsanenetdevice4.cfg.ORG	2024-05-06 17:05:15.931250255 +0900
--- ./opt/brother/scanner/brscan4/brsanenetdevice4.cfg	2024-07-22 22:33:10.883075608 +0900
***************
*** 1,2 ****
!

--- 1,2 ----
! DEVICE=dcp-j552n , "DCP-J552N" , 0x4f9:0x2e3 , IP-ADDRESS=192.168.0.52

/opt/brother/Printers/dcpj552n/lpd/filterdcpj552n

*** ./opt/brother/Printers/dcpj552n/lpd/filterdcpj552n.ORG	2024-05-03 23:29:12.182264882 +0900
--- ./opt/brother/Printers/dcpj552n/lpd/filterdcpj552n	2024-08-11 09:09:08.931587840 +0900
***************
*** 77,84 ****
  		rm -f $PS_TEMP
  		;;
  	* )
! 		A2PS_OP="--output=- -q -1 --no-header --borders no"
! 		eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
  		RET=$?
  		;;
  esac
--- 77,87 ----
  		rm -f $PS_TEMP
  		;;
  	* )
! ##		A2PS_OP="--output=- -q -1 --no-header --borders no"
! ##		eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
! 		A2PS_OP=""
! ####		eval cat $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
! 		eval /usr/local/bin/nkf -w $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP
  		RET=$?
  		;;
  esac

/usr/share/ghostscript/10.03.1/Resource/Init/cidfmap

*** ./usr/share/ghostscript/10.03.1/Resource/Init/cidfmap.ORG	2024-07-14 21:35:50.412262431 +0900
--- ./usr/share/ghostscript/10.03.1/Resource/Init/cidfmap	2024-07-14 21:36:04.651262605 +0900
***************
*** 113,118 ****
--- 113,138 ----
  /Adobe-Japan1           	/Sazanami-Gothic        ;
  /Adobe-Japan2           	/Sazanami-Gothic-JaH    ;

+ % add by m-ito
+ /Tyukaisyo-Medium               << /FileType /TrueType /Path (dfjkaimd.ttf) /CSI [(Japan1) 6] >> ;
+ /Tyukaisyo-Medium-Unocode       << /FileType /TrueType /Path (dfjkaimd-unicode.ttf) /CSI [(Japan1) 6] >> ;
+ /Tyumarugothic-Medium           << /FileType /TrueType /Path (dfjmrgmd.ttf) /CSI [(Japan1) 6] >> ;
+ /Tyumarugothic-Medium-Unicode   << /FileType /TrueType /Path (dfjmrgmd-unicode.ttf) /CSI [(Japan1) 6] >> ;
+ /Gyosyo-Medium                  << /FileType /TrueType /Path (dfjgyomd.ttf) /CSI [(Japan1) 6] >> ;
+ /Gyosyo-Medium-Unicode          << /FileType /TrueType /Path (dfjgyomd-unicode.ttf) /CSI [(Japan1) 6] >> ;
+ /Kanteiryu-Medium               << /FileType /TrueType /Path (dfjktrxb.ttf) /CSI [(Japan1) 6] >> ;
+ /Kanteiryu-Medium-Unicode       << /FileType /TrueType /Path (dfjktrxb-unicode.ttf) /CSI [(Japan1) 6] >> ;
+ /Reisyo-Medium                  << /FileType /TrueType /Path (dfjleimd.ttf) /CSI [(Japan1) 6] >> ;
+ /Reisyo-Medium-Unicode          << /FileType /TrueType /Path (dfjleimd-unicode.ttf) /CSI [(Japan1) 6] >> ;
+ /Pop1-Medium                    << /FileType /TrueType /Path (dfjpop1.ttf)  /CSI [(Japan1) 6] >> ;
+ /Pop1-Medium-Unicode            << /FileType /TrueType /Path (dfjpop1-unicode.ttf)  /CSI [(Japan1) 6] >> ;
+ /Marumoji-Medium                << /FileType /TrueType /Path (dfjmrmmd.ttf) /CSI [(Japan1) 6] >> ;
+ /Marumoji-Medium-Unicode        << /FileType /TrueType /Path (dfjmrmmd-unicode.ttf) /CSI [(Japan1) 6] >> ;
+ %
+ /Kouzanmouhitu-Medium           << /FileType /TrueType /Path (kouzanmouhitu.ttf) /CSI [(Japan1) 6] >> ;
+ %/Eudc                          << /FileType /TrueType /Path (eudc.ttf) /CSI [(Artifex) (Unicode) 0] >> ;
+ %/SME                           << /FileType /TrueType /Path (sazanami-mincho-eudc.ttf) /CSI [(Artifex) (Unicode) 0] >> ;
+
  %% cidfmap.ko
  %% To enable Korean printing support, install the fonts shown in the example
  %% here and uncomment the block below:

/usr/share/sendmail/cf/cf/config.mc

*** ./usr/share/sendmail/cf/cf/config.mc.ORG	2024-04-29 23:44:23.006042321 +0900
--- ./usr/share/sendmail/cf/cf/config.mc	2024-04-29 23:53:04.007048681 +0900
***************
*** 14,28 ****
  OSTYPE(`linux')dnl
  dnl#
  dnl# You will need to create the certificates below with OpenSSL first:
! define(`confCACERT_PATH', `/etc/mail/certs/')
! define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
! define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem')
! define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem')
  dnl# These settings help protect against people verifying email addresses
  dnl# at your site in order to send you email that you probably don't want:
  define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
  dnl# Uncomment the line below to send outgoing mail through an external server:
  dnl define(`SMART_HOST',`mailserver.example.com')
  dnl# No timeout for ident:
  define(`confTO_IDENT', `0')dnl
  dnl# Enable the line below to use smrsh to restrict what sendmail can run:
--- 14,29 ----
  OSTYPE(`linux')dnl
  dnl#
  dnl# You will need to create the certificates below with OpenSSL first:
! dnl##define(`confCACERT_PATH', `/etc/mail/certs/')
! dnl##define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
! dnl##define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem')
! dnl##define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem')
  dnl# These settings help protect against people verifying email addresses
  dnl# at your site in order to send you email that you probably don't want:
  define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
  dnl# Uncomment the line below to send outgoing mail through an external server:
  dnl define(`SMART_HOST',`mailserver.example.com')
+ define(`SMART_HOST',`smtp:lib100.artie.or.jp')
  dnl# No timeout for ident:
  define(`confTO_IDENT', `0')dnl
  dnl# Enable the line below to use smrsh to restrict what sendmail can run:
***************
*** 34,46 ****
  FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
  FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
  FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
! FEATURE(`blacklist_recipients')dnl
  FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
  FEATURE(`always_add_domain')dnl
  FEATURE(`redirect')dnl
  FEATURE(`no_default_msa')dnl
  dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
  dnl FEATURE(`accept_unresolvable_domains')dnl
  EXPOSED_USER(`root')dnl
  dnl# Also accept mail for localhost.localdomain:
  LOCAL_DOMAIN(`localhost.localdomain')dnl
--- 35,49 ----
  FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
  FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
  FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
! dnl##FEATURE(`blacklist_recipients')dnl
! FEATURE(`blocklist_recipients')dnl
  FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
  FEATURE(`always_add_domain')dnl
  FEATURE(`redirect')dnl
  FEATURE(`no_default_msa')dnl
  dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
  dnl FEATURE(`accept_unresolvable_domains')dnl
+ FEATURE(`accept_unresolvable_domains')dnl
  EXPOSED_USER(`root')dnl
  dnl# Also accept mail for localhost.localdomain:
  LOCAL_DOMAIN(`localhost.localdomain')dnl
***************
*** 48,61 ****
  MAILER(smtp)dnl
  MAILER(procmail)dnl
  dnl# Allow SASL authentication/relaying:
! define(`confAUTH_OPTIONS', `A p y')dnl
! define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
! TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
! DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
  dnl# Daemon options after M= below that might need to be changed are:
  dnl# s (allow SSL, not only TLS)
  dnl# a (require authentication)
! DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Esa')dnl
! LOCAL_CONFIG
  dnl# Do not allow the weak SSLv2:
! O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL
--- 51,64 ----
  MAILER(smtp)dnl
  MAILER(procmail)dnl
  dnl# Allow SASL authentication/relaying:
! dnl##define(`confAUTH_OPTIONS', `A p y')dnl
! dnl##define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
! dnl##TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
! dnl##DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
  dnl# Daemon options after M= below that might need to be changed are:
  dnl# s (allow SSL, not only TLS)
  dnl# a (require authentication)
! dnl##DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Esa')dnl
! dnl##LOCAL_CONFIG
  dnl# Do not allow the weak SSLv2:
! dnl##O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL

/usr/local/etc/freshclam.conf

*** ./usr/local/etc/freshclam.conf.ORG	2024-04-30 00:55:24.980094347 +0900
--- ./usr/local/etc/freshclam.conf	2024-04-30 00:56:12.667094930 +0900
***************
*** 5,16 ****


  # Comment or remove the line below.
! Example

  # Path to the database directory.
  # WARNING: It must match clamd.conf's directive!
  # Default: hardcoded (depends on installation options)
  #DatabaseDirectory /var/lib/clamav

  # Path to the log file (make sure it has proper permissions)
  # Default: disabled
--- 5,17 ----


  # Comment or remove the line below.
! ##Example

  # Path to the database directory.
  # WARNING: It must match clamd.conf's directive!
  # Default: hardcoded (depends on installation options)
  #DatabaseDirectory /var/lib/clamav
+ DatabaseDirectory /usr/local/share/clamav

  # Path to the log file (make sure it has proper permissions)
  # Default: disabled

/usr/local/etc/clamd.conf

*** ./usr/local/etc/clamd.conf.ORG	2024-04-30 00:53:24.927092882 +0900
--- ./usr/local/etc/clamd.conf	2024-04-30 00:55:00.537094049 +0900
***************
*** 5,11 ****


  # Comment or remove the line below.
! Example

  # Uncomment this option to enable logging.
  # LogFile must be writable for the user running daemon.
--- 5,11 ----


  # Comment or remove the line below.
! ##Example

  # Uncomment this option to enable logging.
  # LogFile must be writable for the user running daemon.
***************
*** 83,88 ****
--- 83,89 ----
  # Path to the database directory.
  # Default: hardcoded (depends on installation options)
  #DatabaseDirectory /var/lib/clamav
+ DatabaseDirectory /usr/local/share/clamav

  # Only load the official signatures published by the ClamAV project.
  # Default: no
***************
*** 100,105 ****
--- 101,107 ----
  # Default: disabled (must be specified by a user)
  #LocalSocket /run/clamav/clamd.sock
  #LocalSocket /tmp/clamd.sock
+ LocalSocket /tmp/clamd.sock

  # Sets the group ownership on the unix socket.
  # Default: disabled (the primary group of the user running clamd)
***************
*** 116,121 ****
--- 118,124 ----
  # TCP port address.
  # Default: no
  #TCPSocket 3310
+ TCPSocket 3310

  # TCP address.
  # By default we bind to INADDR_ANY, probably not wise.
***************
*** 124,129 ****
--- 127,133 ----
  # times if you want to listen on multiple IPs. IPv6 is now supported.
  # Default: no
  #TCPAddr localhost
+ TCPAddr localhost

  # Maximum length the queue of pending connections may grow to.
  # Default: 200

/etc/fstab

*** ./etc/fstab.ORG	2024-05-19 10:41:23.292003714 +0900
--- ./etc/fstab	2024-05-19 10:43:09.653005012 +0900
***************
*** 1,5 ****
  /dev/nvme0n1p2   swap             swap        defaults         0   0
! /dev/nvme0n1p3   /                ext4        defaults         1   1
  /dev/nvme0n1p1   /boot/efi        vfat        defaults         1   0
  #/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro,comment=x-gvfs-show 0   0
  /dev/fd0         /mnt/floppy      auto        noauto,owner     0   0
--- 1,5 ----
  /dev/nvme0n1p2   swap             swap        defaults         0   0
! /dev/nvme0n1p3   /                ext4        defaults,noatime 1   1
  /dev/nvme0n1p1   /boot/efi        vfat        defaults         1   0
  #/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro,comment=x-gvfs-show 0   0
  /dev/fd0         /mnt/floppy      auto        noauto,owner     0   0

/etc/exports

*** ./etc/exports.ORG	2024-05-01 22:31:40.360597620 +0900
--- ./etc/exports	2024-05-01 22:32:08.650597965 +0900
***************
*** 1,4 ****
--- 1,6 ----
  # See exports(5) for a description.
  # This file contains a list of all directories exported to other computers.
  # It is used by rpc.nfsd and rpc.mountd.
+ /	192.168.0.0/255.255.255.0(ro,no_root_squash,no_subtree_check,sync)
+ #/mnt/export	192.168.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,sync)

/etc/sane.d/dll.conf

*** ./etc/sane.d/dll.conf.ORG	2024-05-06 17:07:45.526252081 +0900
--- ./etc/sane.d/dll.conf	2024-05-06 17:08:22.916252538 +0900
***************
*** 7,12 ****
--- 7,13 ----
  # The next line enables the network backend; comment it out if you don't
  # need to use a remote SANE scanner over the network -- see sane-net(5)
  # and saned(8) for details.
+ brother4
  net
  abaton
  agfafocus

/etc/sane.d/net.conf

*** ./etc/sane.d/net.conf.ORG	2024-05-06 17:06:59.263251516 +0900
--- ./etc/sane.d/net.conf	2024-05-06 17:07:28.824251877 +0900
***************
*** 12,14 ****
--- 12,16 ----
  # directly or through the net backend.  Going through the net backend
  # may be necessary to access devices that need special privileges.
  # localhost
+
+ 192.168.0.52

/etc/elogind/logind.conf.d/LidSwitch.conf

*** ./etc/elogind/logind.conf.d/LidSwitch.conf.ORG	2024-05-01 22:41:10.391604578 +0900
--- ./etc/elogind/logind.conf.d/LidSwitch.conf	2024-08-11 09:15:31.661592512 +0900
***************
*** 0 ****
--- 1,51 ----
+ #  This file is part of elogind.
+ #
+ #  elogind is free software; you can redistribute it and/or modify it under the
+ #  terms of the GNU Lesser General Public License as published by the Free
+ #  Software Foundation; either version 2.1 of the License, or (at your option)
+ #  any later version.
+ #
+ # Entries in this file show the compile time defaults. Local configuration
+ # should be created by either modifying this file (or a copy of it placed in
+ # /etc/ if the original file is shipped in /usr/), or by creating "drop-ins" in
+ # the /etc/elogind/logind.conf.d/ directory. The latter is generally
+ # recommended. Defaults can be restored by simply deleting the main
+ # configuration file and all drop-ins located in /etc/.
+ #
+ # See logind.conf(5) for details.
+
+ [Login]
+ #KillUserProcesses=no
+ #KillOnlyUsers=
+ #KillExcludeUsers=root
+ #InhibitDelayMaxSec=5
+ #UserStopDelaySec=10
+ #HandlePowerKey=poweroff
+ #HandlePowerKeyLongPress=ignore
+ #HandleRebootKey=reboot
+ #HandleRebootKeyLongPress=poweroff
+ #HandleSuspendKey=suspend
+ #HandleSuspendKeyLongPress=hibernate
+ #HandleHibernateKey=hibernate
+ #HandleHibernateKeyLongPress=ignore
+ #
+ # Don't sleep by closing LCD panel
+ #
+ HandleLidSwitch=ignore
+ #
+ #HandleLidSwitchExternalPower=suspend
+ #HandleLidSwitchDocked=ignore
+ #PowerKeyIgnoreInhibited=no
+ #SuspendKeyIgnoreInhibited=no
+ #HibernateKeyIgnoreInhibited=no
+ #LidSwitchIgnoreInhibited=yes
+ #RebootKeyIgnoreInhibited=no
+ #HoldoffTimeoutSec=30s
+ #IdleAction=ignore
+ #IdleActionSec=30min
+ #RuntimeDirectorySize=10%
+ #RuntimeDirectoryInodesMax=
+ #RemoveIPC=yes
+ #InhibitorsMax=8192
+ #SessionsMax=8192
+ #StopIdleSessionSec=infinity

/etc/modprobe.d/em28xx.conf

*** ./etc/modprobe.d/em28xx.conf.ORG	2024-07-07 19:24:45.886509874 +0900
--- ./etc/modprobe.d/em28xx.conf	2024-07-07 19:24:25.327509623 +0900
***************
*** 0 ****
--- 1,2 ----
+ install em28xx /sbin/modprobe --ignore-install em28xx card=72; /bin/echo "117f 5207" > /sys/bus/usb/drivers/em28xx/new_id
+

/etc/rc.d/rc.local

*** ./etc/rc.d/rc.local.ORG	2024-05-01 22:27:21.241594457 +0900
--- ./etc/rc.d/rc.local	2024-07-12 23:21:36.620956782 +0900
***************
*** 7,9 ****
--- 7,64 ----
  # make an /etc/rc.d/rc.local_shutdown script and put those
  # commands in there.

+ if [ -x /usr/bin/rm ]
+ then
+ 	/usr/bin/rm -fr /tmp/*.lock
+ 	for i in `find /tmp -ctime +10 | egrep '^/tmp/'`
+ 	do
+ 		/usr/bin/rm -fr $i
+ 	done
+ 	echo "Clean /tmp."
+ fi
+
+ #if [ -x /sbin/route ]
+ #then
+ #	/sbin/route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.0.10
+ #fi
+
+ #if [ -x /usr/bin/sensors ]
+ #then
+ #	/sbin/modprobe coretemp
+ #	/usr/bin/sensors -s
+ #fi
+
+ if [ -x /usr/sbin/pcscd ]
+ then
+ 	/etc/rc.d/rc.pcscd start
+ 	echo "Starting pcscd."
+ fi
+
+ if [ -x /usr/sbin/alsactl ]
+ then
+ 	/usr/sbin/alsactl restore
+ 	echo "Restore alsa setting."
+ fi
+
+ if [ -x /usr/local/canna/sbin/cannaserver ]
+ then
+ 	rm /tmp/.iroha_unix/IROHA
+ 	/usr/local/canna/sbin/cannaserver -inet -u bin
+ 	echo "Starting cannaserver."
+ fi
+
+ if [ -x /usr/local/sbin/clamd ]
+ then
+ 	/usr/local/sbin/clamd &
+ 	echo "Starting clamd."
+ fi
+
+ if [ -x /usr/bin/rsync ]
+ then
+ 	/usr/bin/rsync --daemon --config=/etc/rsyncd.conf
+ fi
+
+ #if [ -x /sbin/sysctl ]
+ #then
+ #	/sbin/sysctl --system -e
+ #fi

/etc/rc.d/rc.inet1.conf

*** ./etc/rc.d/rc.inet1.conf.ORG	2024-04-29 09:40:59.169002907 +0900
--- ./etc/rc.d/rc.inet1.conf	2024-04-29 10:26:02.407002458 +0900
***************
*** 18,24 ****
  # =============================================================================

  # IPv4 config options for eth0:
! IPADDRS[0]="192.168.0.3/24"
  USE_DHCP[0]=""
  # IPv6 config options for eth0:
  IP6ADDRS[0]=""
--- 18,25 ----
  # =============================================================================

  # IPv4 config options for eth0:
! #IPADDRS[0]="192.168.0.3/24"
! IPADDRS[0]=""
  USE_DHCP[0]=""
  # IPv6 config options for eth0:
  IP6ADDRS[0]=""
***************
*** 166,171 ****
--- 167,177 ----
  #WLAN_WPA[4]="wpa_supplicant"
  #WLAN_WPADRIVER[4]="wext"
  #WLAN_WPAWAIT[4]=30
+ IFNAME[4]="wlan0"
+ IPADDRS[4]="192.168.0.3"
+ WLAN_WPA[4]="wpa_supplicant"
+ #WLAN_WPADRIVER[4]="wext"
+ WLAN_WPADRIVER[4]="nl80211"

  # =============================================================================

/etc/rsyncd.conf

*** ./etc/rsyncd.conf.ORG	2024-05-01 22:38:52.097602890 +0900
--- ./etc/rsyncd.conf	2024-05-01 22:54:59.583008478 +0900
***************
*** 0 ****
--- 1,8 ----
+ uid = root
+ gid = root
+ [root_partition]
+ 	comment = lifebook1 root partition
+ 	path = /
+ 	read only = true
+ 	hosts allow = 192.168.0.100
+ 	hosts deny = *

/etc/httpd/httpd.conf

*** ./etc/httpd/httpd.conf.ORG	2024-06-20 23:28:37.410702067 +0900
--- ./etc/httpd/httpd.conf	2024-06-20 23:52:44.817719736 +0900
***************
*** 83,89 ****
--- 83,93 ----
  LoadModule access_compat_module lib64/httpd/modules/mod_access_compat.so
  LoadModule auth_basic_module lib64/httpd/modules/mod_auth_basic.so
  #LoadModule auth_form_module lib64/httpd/modules/mod_auth_form.so
+
+ # by m-ito
  #LoadModule auth_digest_module lib64/httpd/modules/mod_auth_digest.so
+ LoadModule auth_digest_module lib64/httpd/modules/mod_auth_digest.so
+
  #LoadModule allowmethods_module lib64/httpd/modules/mod_allowmethods.so
  #LoadModule file_cache_module lib64/httpd/modules/mod_file_cache.so
  #LoadModule cache_module lib64/httpd/modules/mod_cache.so
***************
*** 104,110 ****
--- 108,118 ----
  LoadModule reqtimeout_module lib64/httpd/modules/mod_reqtimeout.so
  #LoadModule ext_filter_module lib64/httpd/modules/mod_ext_filter.so
  #LoadModule request_module lib64/httpd/modules/mod_request.so
+
+ # by m-ito
  #LoadModule include_module lib64/httpd/modules/mod_include.so
+ LoadModule include_module lib64/httpd/modules/mod_include.so
+
  LoadModule filter_module lib64/httpd/modules/mod_filter.so
  #LoadModule reflector_module lib64/httpd/modules/mod_reflector.so
  #LoadModule substitute_module lib64/httpd/modules/mod_substitute.so
***************
*** 166,175 ****
--- 174,187 ----
  #LoadModule asis_module lib64/httpd/modules/mod_asis.so
  #LoadModule info_module lib64/httpd/modules/mod_info.so
  <IfModule !mpm_prefork_module>
+ # by m-ito
  	#LoadModule cgid_module lib64/httpd/modules/mod_cgid.so
+ 	LoadModule cgid_module lib64/httpd/modules/mod_cgid.so
  </IfModule>
  <IfModule mpm_prefork_module>
+ # by m-ito
  	#LoadModule cgi_module lib64/httpd/modules/mod_cgi.so
+ 	LoadModule cgi_module lib64/httpd/modules/mod_cgi.so
  </IfModule>
  #LoadModule dav_fs_module lib64/httpd/modules/mod_dav_fs.so
  #LoadModule dav_lock_module lib64/httpd/modules/mod_dav_lock.so
***************
*** 178,184 ****
--- 190,200 ----
  LoadModule dir_module lib64/httpd/modules/mod_dir.so
  #LoadModule actions_module lib64/httpd/modules/mod_actions.so
  #LoadModule speling_module lib64/httpd/modules/mod_speling.so
+
+ # by m-ito
  #LoadModule userdir_module lib64/httpd/modules/mod_userdir.so
+ LoadModule userdir_module lib64/httpd/modules/mod_userdir.so
+
  LoadModule alias_module lib64/httpd/modules/mod_alias.so
  #LoadModule rewrite_module lib64/httpd/modules/mod_rewrite.so

***************
*** 427,433 ****
--- 443,451 ----
      # To use CGI scripts outside of ScriptAliased directories:
      # (You will also need to add "ExecCGI" to the "Options" directive.)
      #
+ # by m-ito
      #AddHandler cgi-script .cgi
+     AddHandler cgi-script .cgi

      # For type maps (negotiated resources):
      #AddHandler type-map var
***************
*** 438,445 ****
--- 456,466 ----
      # To parse .shtml files for server-side includes (SSI):
      # (You will also need to add "Includes" to the "Options" directive.)
      #
+ # by m-ito
      #AddType text/html .shtml
      #AddOutputFilter INCLUDES .shtml
+     AddType text/html .shtml
+     AddOutputFilter INCLUDES .shtml
  </IfModule>

  #
***************
*** 499,505 ****
--- 520,528 ----
  #Include /etc/httpd/extra/httpd-languages.conf

  # User home directories
+ # by m-ito
  #Include /etc/httpd/extra/httpd-userdir.conf
+ Include /etc/httpd/extra/httpd-userdir.conf

  # Real-time info on requests and configuration
  #Include /etc/httpd/extra/httpd-info.conf

/etc/httpd/extra/httpd-userdir.conf

*** ./etc/httpd/extra/httpd-userdir.conf.ORG	2024-06-20 23:29:09.260702456 +0900
--- ./etc/httpd/extra/httpd-userdir.conf	2024-06-20 23:31:40.717704305 +0900
***************
*** 14,21 ****
  # for a site where these directories are restricted to read-only.
  #
  <Directory "/home/*/public_html">
!     AllowOverride FileInfo AuthConfig Limit Indexes
!     Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
      Require method GET POST OPTIONS
  </Directory>

--- 14,24 ----
  # for a site where these directories are restricted to read-only.
  #
  <Directory "/home/*/public_html">
! # by m-ito
! #    AllowOverride FileInfo AuthConfig Limit Indexes
! #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
!     AllowOverride All
!     Options Includes FollowSymlinks ExecCGI
      Require method GET POST OPTIONS
  </Directory>

/etc/inittab

*** ./etc/inittab.ORG	2024-04-29 09:26:04.083000538 +0900
--- ./etc/inittab	2024-05-01 23:47:54.472001995 +0900
***************
*** 22,28 ****
  #   6 = reboot

  # Default runlevel. (Do not set to 0 or 6)
! id:3:initdefault:

  # System initialization (runs when system boots).
  si:S:sysinit:/etc/rc.d/rc.S
--- 22,29 ----
  #   6 = reboot

  # Default runlevel. (Do not set to 0 or 6)
! #id:3:initdefault:
! id:4:initdefault:

  # System initialization (runs when system boots).
  si:S:sysinit:/etc/rc.d/rc.S
***************
*** 34,40 ****
  rc:2345:wait:/etc/rc.d/rc.M

  # What to do at the "Three Finger Salute".
! ca::ctrlaltdel:/sbin/shutdown -t5 -r now

  # Runlevel 0 halts the system.
  l0:0:wait:/etc/rc.d/rc.0
--- 35,42 ----
  rc:2345:wait:/etc/rc.d/rc.M

  # What to do at the "Three Finger Salute".
! #ca::ctrlaltdel:/sbin/shutdown -t5 -r now
! ca::ctrlaltdel:/sbin/shutdown -h now

  # Runlevel 0 halts the system.
  l0:0:wait:/etc/rc.d/rc.0

/etc/passwd

*** ./etc/passwd.ORG	2024-05-05 17:32:58.979783410 +0900
--- ./etc/passwd	2024-05-05 23:32:22.840046641 +0900
***************
*** 43,45 ****
--- 43,48 ----
  ldap:x:330:330:OpenLDAP server:/var/lib/openldap:/bin/false
  openvpn:x:443:443:User for OpenVPN:/:/bin/false
  overflowuid:x:65534:65534:System UID overflow:/:/bin/false
+ m-ito:x:503:503::/home/m-ito:/bin/bash
+ clamav:x:513:513:clamav anti virus:/usr/local/share/clamav:/bin/false
+ pcscd:x:257:257::/var/run/pcscd:/bin/false

/etc/group

*** ./etc/group.ORG	2024-05-05 17:33:15.206783608 +0900
--- ./etc/group	2024-05-05 23:31:36.651046077 +0900
***************
*** 8,22 ****
  lp:x:7:lp
  mem:x:8:
  kmem:x:9:
! wheel:x:10:root
  floppy:x:11:
  mail:x:12:mail
  news:x:13:news
  uucp:x:14:uucp
  man:x:15:
  dialout:x:16:uucp
! audio:x:17:root,pulse
! video:x:18:sddm
  cdrom:x:19:m-ito
  games:x:20:
  slocate:x:21:
--- 8,22 ----
  lp:x:7:lp
  mem:x:8:
  kmem:x:9:
! wheel:x:10:root,m-ito,apache
  floppy:x:11:
  mail:x:12:mail
  news:x:13:news
  uucp:x:14:uucp
  man:x:15:
  dialout:x:16:uucp
! audio:x:17:root,pulse,m-ito
! video:x:18:sddm,m-ito,apache
  cdrom:x:19:m-ito
  games:x:20:
  slocate:x:21:
***************
*** 65,67 ****
--- 65,70 ----
  ldap:x:330:
  openvpn:x:443:
  overflowgid:x:65534:
+ m-ito:x:503:apache
+ clamav:x:513:
+ pcscd:x:257:

/etc/ld.so.conf

*** ./etc/ld.so.conf.ORG	2024-07-12 23:23:14.139957972 +0900
--- ./etc/ld.so.conf	2024-07-12 23:23:41.409958305 +0900
***************
*** 2,5 ****
--- 2,6 ----
  /lib64
  /usr/lib64
  /usr/local/lib64
+ /usr/local/canna/lib
  /usr/x86_64-slackware-linux/lib64

/etc/X11/app-defaults/Kinput2

*** ./etc/X11/app-defaults/Kinput2.ORG	2024-07-12 23:53:05.827979844 +0900
--- ./etc/X11/app-defaults/Kinput2	2024-07-12 23:55:19.242981472 +0900
***************
*** 96,102 ****
  ! XimpProtocol
  *XimpProtocol.ForceDefaultServer: true
  ! X Input Method Protocol
! *IMProtocol.locales: ja_JP.SJIS, ja_JP.EUC, ja_JP, japanese, japan, ja
  ! common to XimpProtocol and IMProtocol
  *defaultFontList: -misc-fixed-medium-r-normal--14-*-*-*-c-*
  *ConversionStartKeys: \
--- 96,102 ----
  ! XimpProtocol
  *XimpProtocol.ForceDefaultServer: true
  ! X Input Method Protocol
! *IMProtocol.locales: ja_JP.UTF-8, ja_JP.SJIS, ja_JP.EUC, ja_JP, japanese, japan, ja
  ! common to XimpProtocol and IMProtocol
  *defaultFontList: -misc-fixed-medium-r-normal--14-*-*-*-c-*
  *ConversionStartKeys: \

/etc/X11/xorg.conf.d/90-keyboard-layout.conf

*** ./etc/X11/xorg.conf.d/90-keyboard-layout.conf.ORG	2024-04-29 10:38:31.587008796 +0900
--- ./etc/X11/xorg.conf.d/90-keyboard-layout.conf	2024-04-29 10:38:31.608008796 +0900
***************
*** 0 ****
--- 1,46 ----
+ #
+ # cp /usr/share/X11/xorg.conf.d/90-keyboard-layout.conf /etc/X11/xorg.conf.d/
+ #
+ Section "InputClass"
+ 	Identifier "keyboard-all"
+ 	MatchIsKeyboard "on"
+ 	MatchDevicePath "/dev/input/event*"
+ 	Driver "evdev"
+ ##	Option "XkbLayout" "us"
+ 	Option "XkbLayout" "jp"
+ 	#Option "XkbVariant" ""
+ ##	Option "XkbOptions" "terminate:ctrl_alt_bksp"
+ 	Option "XkbOptions" "terminate:ctrl_alt_bksp,ctrl:nocaps"
+ EndSection
+
+ # READ THIS FOR CUSTOM KEYBOARD INFORMATION
+ #
+ #  If you want to add a custom model/layout/variant to X, you will need to COPY
+ #  this file to /etc/X11/xorg.conf.d/ and edit that copy.  After editing it to
+ #  suit, you will need to restart X.
+ #
+ #  Here's an example of the lines from above:
+ #
+ # Section "InputClass"
+ #	Identifier "keyboard-all"
+ #	MatchIsKeyboard "on"
+ #	MatchDevicePath "/dev/input/event*"
+ #	Driver "evdev"
+ #	Option "XkbLayout" "us"
+ #	Option "XkbVariant" "intl"
+ #	Option "XkbOptions" "compose:rwin,terminate:ctrl_alt_bksp"
+ # EndSection
+ #
+ #  Many desktop environments, including KDE and Xfce, have their own methods to
+ #  configure keyboard layouts and such if you'd like to use them.
+ #
+ #  If you prefer to use the "old" way of configuring keyboards (without input
+ #  device hotplugging), then you'll need to add the following lines to the
+ #  ServerFlags section of /etc/X11/xorg.conf:
+ #    Option   "AllowEmptyInput"     "false"
+ #    Option   "AutoAddDevices"      "false"
+ #    Option   "AutoEnableDevices"   "false"
+ #  Alternatively, you can break this up into separate "stubs" in the xorg.conf.d/
+ #  directory, but that's your call.  Assuming you elect to keep a monolithic
+ #  /etc/X11/xorg.conf file, you can now edit the Keyboard section as usual.
+

/etc/sudoers

*** ./etc/sudoers.ORG	2024-05-05 23:33:57.562047797 +0900
--- ./etc/sudoers	2024-05-05 23:34:16.917048033 +0900
***************
*** 108,114 ****
  # %wheel ALL=(ALL:ALL) ALL

  ## Same thing without a password
! # %wheel ALL=(ALL:ALL) NOPASSWD: ALL

  ## Uncomment to allow members of group sudo to execute any command
  # %sudo	ALL=(ALL:ALL) ALL
--- 108,114 ----
  # %wheel ALL=(ALL:ALL) ALL

  ## Same thing without a password
! %wheel ALL=(ALL:ALL) NOPASSWD: ALL

  ## Uncomment to allow members of group sudo to execute any command
  # %sudo	ALL=(ALL:ALL) ALL

/etc/wpa_supplicant.conf

*** ./etc/wpa_supplicant.conf.ORG	2024-04-29 09:45:20.568006098 +0900
--- ./etc/wpa_supplicant.conf	2024-04-29 10:21:30.306001334 +0900
***************
*** 1,2 ****
--- 1,12 ----
  ctrl_interface=/var/run/wpa_supplicant
  ctrl_interface_group=root
+ network={
+         scan_ssid=1
+         ssid="YOUR_SSID"
+         proto=RSN WPA
+         pairwise=CCMP TKIP
+         group=CCMP TKIP
+         key_mgmt=WPA-PSK WPA-EAP
+         #psk="YOUR_PSK"
+         # wpa_passphrase YOUR_SSID YOUR_PSK
+ 	psk=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ }

/etc/slackpkg/mirrors

*** ./etc/slackpkg/mirrors.ORG	2024-05-01 23:26:43.716031722 +0900
--- ./etc/slackpkg/mirrors	2024-05-01 23:27:22.569032196 +0900
***************
*** 189,196 ****
  #----------------------------------------------------------------
  # Slackware64-current
  #----------------------------------------------------------------
  # USE MIRRORS.SLACKWARE.COM (DO NOT USE FTP - ONLY HTTP FINDS A NEARBY MIRROR)
! # https://mirrors.slackware.com/slackware/slackware64-current/
  #
  #
  # Here are some individual mirrors that can be used instead of the
--- 189,197 ----
  #----------------------------------------------------------------
  # Slackware64-current
  #----------------------------------------------------------------
+ https://mirror.slackware.jp/slackware/slackware64-current/
  # USE MIRRORS.SLACKWARE.COM (DO NOT USE FTP - ONLY HTTP FINDS A NEARBY MIRROR)
! #https://mirrors.slackware.com/slackware/slackware64-current/
  #
  #
  # Here are some individual mirrors that can be used instead of the
***************
*** 275,283 ****
  # http://ba.mirror.garr.it/mirrors/Slackware/slackware64-current/
  # JAPAN (JP)
  # ftp://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/
! # http://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/
  # ftp://riksun.riken.go.jp/Linux/slackware/slackware64-current/
! # http://riksun.riken.go.jp/Linux/slackware/slackware64-current/
  # LITHUANIA (LT)
  # http://mirrors.atviras.lt/slackware/slackware64-current/
  # https://mirrors.atviras.lt/slackware/slackware64-current/
--- 276,284 ----
  # http://ba.mirror.garr.it/mirrors/Slackware/slackware64-current/
  # JAPAN (JP)
  # ftp://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/
! ##http://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/
  # ftp://riksun.riken.go.jp/Linux/slackware/slackware64-current/
! ##http://riksun.riken.go.jp/Linux/slackware/slackware64-current/
  # LITHUANIA (LT)
  # http://mirrors.atviras.lt/slackware/slackware64-current/
  # https://mirrors.atviras.lt/slackware/slackware64-current/

/etc/slackpkg/blacklist

*** ./etc/slackpkg/blacklist.ORG	2024-04-29 22:44:26.260257721 +0900
--- ./etc/slackpkg/blacklist	2024-08-14 10:39:19.989079565 +0900
***************
*** 35,41 ****
  #kernel-generic.*
  #kernel-huge.*
  #kernel-modules.*
! #kernel-source
  #
  # This one will blacklist all SBo packages:
! #[0-9]+_SBo
--- 35,67 ----
  #kernel-generic.*
  #kernel-huge.*
  #kernel-modules.*
! #kernel-source.*
  #
  # This one will blacklist all SBo packages:
! [0-9]+_SBo
!
! # add temorarily
! # git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
! #kernel-firmware.*
! #kernel-headers.*
!
! # Slackware package, but original configuration
! ffmpeg-.*
!
! # Slackware package, but removed
! postfix.*
!
! # Slackware Extra package
! sendmail.*
!
! # Non slackware packages
! dcpj552n.*
! brother-udev-rule-type1.*
! brscan-skey.*
! brscan4.*
! libobasis7.6.*
! libreoffice7.6.*
! libspiro.*
! libuninameslist.*
! fontforge.*
! audapolis.*

/boot/efi/EFI/Slackware/elilo.conf

*** ./boot/efi/EFI/Slackware/elilo.conf.ORG	2024-05-03 17:12:40.000000000 +0900
--- ./boot/efi/EFI/Slackware/elilo.conf	2024-07-15 00:13:44.000000000 +0900
***************
*** 1,9 ****
  chooser=simple
! delay=1
! timeout=1
  #
  image=vmlinuz
          label=vmlinuz
          initrd=initrd.gz
          read-only
          append="root=/dev/nvme0n1p3 vga=normal ro"
--- 1,18 ----
  chooser=simple
! delay=50
! timeout=50
! #
! prompt
! default=vmlinuz
  #
  image=vmlinuz
          label=vmlinuz
          initrd=initrd.gz
          read-only
+         append="root=/dev/nvme0n1p3 vga=normal mitigations=off ro"
+ #
+ image=vmlinuz.ORG
+         label=vmlinuz.ORG
+         initrd=initrd.ORG.gz
+         read-only
          append="root=/dev/nvme0n1p3 vga=normal ro"

システムアップデート

/root/update_system.sh

#! /bin/sh
slackpkg -batch=on -default_answer=y update </dev/null
slackpkg -batch=on -default_answer=y install-new </dev/null
slackpkg -batch=on -default_answer=y upgrade-all </dev/null
slackpkg -batch=on -default_answer=y clean-system </dev/null

echo '=== check .new files start ==='
/usr/bin/run-parts /etc/cron.daily

for i in `locate '*\.new' | egrep -v '^/home/|^/usr/local/' | egrep 'new$'`
do
	org=`echo $i | sed -e 's/\.new$//'`
	if [ -r ${org}  ]
	then
		diff -c ${org} $i 2>&1
	fi
done
echo '=== check .new files end   ==='

##mod_ver=`cd /lib/modules && /usr/bin/ls -r1 | egrep -v '\.BAK$' | head -1`
mod_ver=`cd /lib/modules && /usr/bin/ls -t1 | egrep -v '\.BAK$' | head -1`
kern_ver=`uname -r`

if [ -r /lib/modules/${kern_ver}/misc/vmnet.ko ]
then
	:
else
#	git clone -b workstation-17.5.1 https://github.com/mkubecek/vmware-host-modules.git
	cd vmware-host-modules && make && make install
	sync;sync;sync
	reboot
fi

if [ "X${mod_ver}" = "X${kern_ver}" ]
then
	:
else
#	cp /boot/initrd.gz /boot/efi/EFI/Slackware/initrd.gz
	cp /boot/vmlinuz /boot/efi/EFI/Slackware/vmlinuz
	sync;sync;sync
	reboot
fi

# deb s
#uname -a
#wget --no-check-certificate  https://mirrors.slackware.com/slackware/slackware64-current/slackware64/a/  -O - 2>/dev/null |
#	tr '<>' '\n\n' |
#	egrep "^kernel-.*txz$"

ffmpeg -h 2>&1 | head -1
wget --no-check-certificate  https://mirrors.slackware.com/slackware/slackware64-current/slackware64/l/  -O - 2>/dev/null |
	tr '<>' '\n\n' |
	egrep "^ffmpeg-.*txz$"

gs --version
ls /var/log/packages/ghostscript-*|egrep -v font
# deb e