2018年08月12日 How to configure for rsync deamon
_ How to configure for rsync deamon
I'm going to get backup 192.168.0.26 from 192.168.0.100 :)
/etc/rsyncd.conf in 192.168.0.26
uid = root
gid = root
[root_partition]
comment = root partition of my client-pc
path = /
read only = true
hosts allow = 192.168.0.100
hosts deny = *
Run rsync with daemon mode in 192.168.0.26
/etc/rc.d/rc.local
if [ -x /usr/bin/rsync ]
then
/usr/bin/rsync --daemon --config=/etc/rsyncd.conf
fi
Backup command in 192.168.0.100
rsync -a --delete -v \
--exclude "/proc/" \
--exclude "/sys/" \
--exclude "/dev/shm/" \
--exclude "/run/" \
rsync://192.168.0.26/root_partition \
/backup_dir_for_192.168.0.26
_ Tips about binlog of MySQL
/etc/my.cnf
[mysqld] default-storage-engine=innodb log-bin=mysql-bin expire_logs_days = 5
Backup
$ mysqldump -u root -p password --all-databases >backup.dump
Restore from backup
$ mysql -u root -p password <backup.dump
And restore from binlog
$ mysqlbinlog --start-datetime="2018-08-12 08:45:00" --stop-datetime="2018-08-12 17:15:00" /var/lib/mysql/mysql-bin.XXXXXX | mysql -u root -p password
[ツッコミを入れる]
2024年08月12日 Slackware64-current on LIFEBOOK AH Series
_ Slackware64-current on LIFEBOOK AH Series
メインマシンをLIFEBOOK WA3/F3(中古 Core-i7 1195G7, Memory 32GB, M.2 SSD 1TB)に買い換えた機会にSlackware64-14.2からSlackware64-currentに変更した。
/etc/fstab
/dev/nvme0n1p2 swap swap defaults 0 0 /dev/nvme0n1p3 / ext4 defaults,noatime 1 1 /dev/nvme0n1p1 /boot/efi vfat defaults 1 0 #/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0 /dev/fd0 /mnt/floppy auto noauto,owner 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 proc /proc proc defaults 0 0 tmpfs /dev/shm tmpfs nosuid,nodev,noexec 0 0
gdisk -l /dev/nvme0n1
GPT fdisk (gdisk) version 1.0.10 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/nvme0n1: 1953525168 sectors, 931.5 GiB Model: WD_BLACK SN770 1TB Sector size (logical/physical): 512/512 bytes Disk identifier (GUID): BAB62137-FDB7-4CBF-B6B0-313F47EF3E72 Partition table holds up to 128 entries Main partition table begins at sector 2 and ends at sector 33 First usable sector is 34, last usable sector is 1953525134 Partitions will be aligned on 2048-sector boundaries Total free space is 3437 sectors (1.7 MiB) Number Start (sector) End (sector) Size Code Name 1 2048 206847 100.0 MiB EF00 EFI system partition 2 206848 79898623 38.0 GiB 8200 Linux swap 3 79898624 1953523711 893.4 GiB 8300 Linux filesystem
独自にインストールしたもの
- mew-6.9a.tar.gz(参考)
- nkf-2.1.5.tar.gz
- sf
- sendmail(参考)
- clamav-1.3.1.tar.gz(参考)
How to build
tar xvf clamav-1.0.0.tar.gz cd clamav-1.0.0 mkdir build cd build cmake .. make su make install mkdir /usr/local/share/clamav chown clamav.clamav /usr/local/share/clamav chmod 775 /usr/local/share/clamav
/etc/passwd
clamav:x:513:513:clamav anti virus:/usr/local/share/clamav:/bin/false
/etc/group
clamav:x:513:
/usr/local/etc/clamd.conf
##Example DatabaseDirectory /usr/local/share/clamav LocalSocket /tmp/clamd.socket TCPSocket 3310 TCPAddr localhost
/usr/local/etc/freshclamd.conf
##Example DatabaseDirectory /usr/local/share/clamav ##HTTPProxyServer 192.168.0.100 ##HTTPProxyPort 8080
- マイナンバーカード利用(参考)
- libdvdcss-1.4.3-slackbuild.tar.gz(参考) for vmplayer
- xengine-1.11.tar.gz(参考)
- LibreOffice(参考)
- IPAfont00303.zip
- kouzanmouhitufont.zip(参考)
- dynafont-unicode.tar.gz(参考1, 参考2)
- Brother dcpj552n with CUPS(参考)
- a2ps.pl-1.45-utf8.tar.gz(参考)
filterdcpj552n
*** /opt/brother/Printers/dcpj552n/lpd/filterdcpj552n.ORG 2024-05-03 23:29:12.182264882 +0900 --- /opt/brother/Printers/dcpj552n/lpd/filterdcpj552n 2024-08-11 09:09:08.931587840 +0900 *************** *** 77,84 **** rm -f $PS_TEMP ;; * ) ! A2PS_OP="--output=- -q -1 --no-header --borders no" ! eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP RET=$? ;; esac --- 77,87 ---- rm -f $PS_TEMP ;; * ) ! ## A2PS_OP="--output=- -q -1 --no-header --borders no" ! ## eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP ! A2PS_OP="" ! #### eval cat $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP ! eval /usr/local/bin/nkf -w $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP RET=$? ;; esac
tar xvf aaa_glibc-solibs-2.39-i586-2.txz lib/incoming/ld-2.39.so lib/incoming/libc-2.39.so lib/incoming/libm-2.39.so cp lib/incoming/lib*so /lib/ ldconfig
- Brother dcpj552n with xsane(参考)
/opt/brother/Printers/dcpj552n/cupswrapper/cupswrapperdcpj552n -i mkdir /var/spool/lpd
http://localhost:631/admin/ -> 管理 -> プリンターの追加 -> LPD/LPR ホストまたはプリンター -> lpd://192.168.0.100/lpraw -> 名前、説明、場所 -> または PPD ファイルを提供: /opt/brother/Printers/dcpj552n/cupswrapper/brother_dcpj552n_printer_en.ppd -> プリンターの追加
- TiMidity++(参考)
- zbar-0.23.90-slackbuild.tar.gz(参考)
- fswebcam-20110717.tar.gz(参考)
- audacity
- portmidi-2.0.2-slackbuild.tar.gz
- soxr-0.1.3-slackbuild.tar.gz
- rapidjson-1.1.0-slackbuild.tar.gz
- serd-0.30.16-slackbuild.tar.gz
- sord-0.16.14-slackbuild.tar.gz
- lv2-1.18.10-slackbuild.tar.gz
- suil-0.10.18-slackbuild.tar.gz
- sratom-0.6.14-slackbuild.tar.gz
- python3-flit_core-3.9.0-slackbuild.tar.gz
- python3-installer-0.7.0-slackbuild.tar.gz
- python3-pyproject-hooks-1.0.0-slackbuild.tar.gz
- python3-build-1.2.1-slackbuild.tar.gz
- python3-wheel-0.43.0-slackbuild.tar.gz
- python3-pyproject-metadata-0.8.0-slackbuild.tar.gz
- python3-meson-opt-1.4.0-slackbuild.tar.gz
- python3-mesonpy-0.15.0-slackbuild.tar.gz
- python3-numpy-1.26.3-slackbuild.tar.gz
- lilv-0.24.20-slackbuild.tar.gz
- portaudio-19.7.0-slackbuild.tar.gz
- wxWidgets-3.2.4.1-slackbuild.tar.gz
- libsbsms-20220812_e6c9c3b-slackbuild.tar.gz
- portsmf-234-slackbuild.tar.gz
- audacity-3.5.1-slackbuild.tar.gz
- openshot
- zeromq-4.3.5-slackbuild.tar.gz
- python3-setuptools-opt-69.5.1-slackbuild.tar.gz
- python3-pyzmq-25.1.2-slackbuild.tar.gz
- python3-httplib2-0.22.0-slackbuild.tar.gz
- unittest-cpp-2.0.0-slackbuild.tar.gz
- libopenshot-audio-0.3.2-slackbuild.tar.gz
- cppzmq-4.10.0-slackbuild.tar.gz
- libopenshot-0.3.2-slackbuild.tar.gz
- openshot-3.1.1-slackbuild.tar.gz
- dvdstyler
- vlc
- VMware-Workstation-Full-17.5.2-23775571.x86_64.bundle(参考)
# sh VMware-Workstation-Full-17.5.2-23775571.x86_64.bundle --ignore-errors
## https://bbs.archlinux.org/viewtopic.php?pid=1992431 $ git clone -b workstation-17.5.1 https://github.com/mkubecek/vmware-host-modules.git $ cd vmware-host-modules/ $ make # make install # /etc/init.d/vmware restart
*** ./root/vmware-host-modules/vmnet-only/vmnetInt.h.ORG 2024-05-16 21:39:10.539013690 +0900
--- ./root/vmware-host-modules/vmnet-only/vmnetInt.h 2024-05-16 21:43:04.991016552 +0900
***************
*** 41,48 ****
compat_skb_set_network_header(skb, sizeof (struct ethhdr)), \
dev_queue_xmit(skb) \
)
! #define dev_lock_list() read_lock(&dev_base_lock)
! #define dev_unlock_list() read_unlock(&dev_base_lock)
extern struct proto vmnet_proto;
--- 41,53 ----
compat_skb_set_network_header(skb, sizeof (struct ethhdr)), \
dev_queue_xmit(skb) \
)
! #if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 9, 0)
! # define dev_lock_list() rcu_read_lock()
! # define dev_unlock_list() rcu_read_unlock()
! #else
! # define dev_lock_list() read_lock(&dev_base_lock)
! # define dev_unlock_list() read_unlock(&dev_base_lock)
! #endif
extern struct proto vmnet_proto;
*** ./vmware-host-modules/vmmon-only/include/iocontrols.h.ORG 2024-05-14 22:39:47.000000000 +0900 --- ./vmware-host-modules/vmmon-only/include/iocontrols.h 2024-09-08 01:01:50.244040200 +0900 *************** *** 146,152 **** * the NT specific VMX86_DRIVER_VERSION. */ ! #define VMMON_VERSION (416 << 16 | 0) #define VMMON_VERSION_MAJOR(v) ((uint32) (v) >> 16) #define VMMON_VERSION_MINOR(v) ((uint16) (v)) --- 146,152 ---- * the NT specific VMX86_DRIVER_VERSION. */ ! #define VMMON_VERSION (417 << 16 | 0) #define VMMON_VERSION_MAJOR(v) ((uint32) (v) >> 16) #define VMMON_VERSION_MINOR(v) ((uint16) (v))
# cd /etc/rc.d/rc4.d # ln -s /etc/rc.d/init.d/vmware K08vmware # ln -s /etc/rc.d/init.d/vmware-USBArbitrator K08vmware-USBArbitrator # ln -s /etc/rc.d/init.d/vmware S19vmware # ln -s /etc/rc.d/init.d/vmware-USBArbitrator S50vmware-USBArbitrator
$ /usr/libexec/polkit-gnome-authentication-agent-1 & $ vmplayer
You can use /usr/lib/vmware/bin/vmware-netcfg for nettwork setting o vmnet1 for Hostonly network o vmnet8 for Nat network
- downloadhelper(参考)
$ curl -sSLf https://github.com/aclap-dev/vdhcoapp/releases/latest/download/install.sh | bash
- guvcview-2.1.0-slackbuild.tar.gz
- mjpg-streamer-1.0.0.tar.gz
- FD-3.01j.tar.gz
- d88split-2.zip
- ipamjm00501.tar.gz
- makefontscale.sh
#! /bin/sh
#
# mfs fontfile fndry fmly cp
#
# cd /usr/share/fonts/TTF
# cp fonts.scale fonts.scale.backup
# cp fonts.dir fonts.dir.backup
# /home/m-ito/INSTALLED/makefontscale.sh >fonts.add
# cat fonts.scale.backup | egrep -v 'dfjgyomd.ttf|dfjkaibd.ttf|dfjkailt.ttf|dfjkaimd.ttf|dfjktrxb.ttf|dfjleimd.ttf|dfjmrgbd.ttf|dfjmrglt.ttf|dfjmrgmd.ttf|dfjmrmmd.ttf|dfjmrmw7.ttf|dfjmrmw9.ttf|dfjpop1.ttf|dfjpopw5.ttf|dfjpopw9.ttf|dfjgyomd-unicode.ttf|dfjkaibd-unicode.ttf|dfjkailt-unicode.ttf|dfjkaimd-unicode.ttf|dfjktrxb-unicode.ttf|dfjleimd-unicode.ttf|dfjmrgbd-unicode.ttf|dfjmrgbd-unicode.ttf|dfjmrglt-unicode.ttf|dfjmrgmd-unicode.ttf|dfjmrmmd-unicode.ttf|dfjmrmw7-unicode.ttf|dfjmrmw9-unicode.ttf|dfjpop1-unicode.ttf|dfjpopw5-unicode.ttf|dfjpopw9-unicode.ttf|kochi-gothic.ttf|kochi-mincho.ttf|kouzanmouhitu.ttf|sazanami-gothic.ttf|sazanami-mincho.ttf|ipag.ttf|ipagp.ttf|ipam.ttf|ipamp.ttf|ipamjm.ttf' >junk
# cat junk fonts.add | sort | uniq >fonts.scale
# rm junk
# wc -l fonts.scale # remember LINE
# vim fonts.scale # edit number in first line to (LINE - 1)
# mkfontdir -e /usr/share/fonts/encodings -e /usr/share/fonts/encodings/large
# cp fonts.dir fonts.scale
# fc-cache -f -v
#
# JISX0208-1978, 1983, 1990, 1997, 2012
# JISX0213-2000, 2004, 2012
#
function mfs() {
fontfile="$1"
fndry="$2"
fmly="$3"
cp="$4"
jisx="$5"
for i in iso8859-1 jisx0201.1976-0 ${jisx}
do
bw=""
colon=""
if [ $i = "iso8859-1" -o $i = "jisx0201.1976-0" ]
then
bw="bw=0.5"
colon=":"
fi
echo ${bw}${colon}${fontfile} -${fndry}-${fmly}-medium-r-normal--0-0-0-0-${cp}-0-$i
echo ai=0.4:${bw}${colon}${fontfile} -${fndry}-${fmly}-medium-i-normal--0-0-0-0-${cp}-0-$i
echo ai=0.2:${bw}${colon}${fontfile} -${fndry}-${fmly}-medium-o-normal--0-0-0-0-${cp}-0-$i
echo ds=y:${bw}${colon}${fontfile} -${fndry}-${fmly}-bold-r-normal--0-0-0-0-${cp}-0-$i
echo ds=y:ai=0.4:${bw}${colon}${fontfile} -${fndry}-${fmly}-bold-i-normal--0-0-0-0-${cp}-0-$i
echo ds=y:ai=0.2:${bw}${colon}${fontfile} -${fndry}-${fmly}-bold-o-normal--0-0-0-0-${cp}-0-$i
done
}
# jisx0208.1983-0
mfs dfjgyomd.ttf dynalab "dfgyosho lt" m jisx0208.1983-0
mfs dfjkaibd.ttf dynalab "dfkaisho xb" m jisx0208.1983-0
mfs dfjkailt.ttf dynalab "dfkaisho lt" m jisx0208.1983-0
mfs dfjkaimd.ttf dynalab "dfkaisho md" m jisx0208.1983-0
mfs dfjktrxb.ttf dynalab "dfkanteiryu xb" m jisx0208.1983-0
mfs dfjleimd.ttf dynalab "dfleisho sb" m jisx0208.1983-0
mfs dfjmrgbd.ttf dynalab "dfmarugothic bd" m jisx0208.1983-0
mfs dfjmrglt.ttf dynalab "dfmarugothic lt" m jisx0208.1983-0
mfs dfjmrgmd.ttf dynalab "dfmarugothic md" m jisx0208.1983-0
mfs dfjmrmmd.ttf dynalab "dfmarumoji sl" m jisx0208.1983-0
mfs dfjmrmw7.ttf dynalab "dfmarumoji w7" m jisx0208.1983-0
mfs dfjmrmw9.ttf dynalab "dfmarumoji w9" m jisx0208.1983-0
mfs dfjpop1.ttf dynalab "dfpop1 sb" m jisx0208.1983-0
mfs dfjpopw5.ttf dynalab "dfpop1 w5" m jisx0208.1983-0
mfs dfjpopw9.ttf dynalab "dfpop1 w9" m jisx0208.1983-0
# jisx0208.1983-0
mfs dfjgyomd-unicode.ttf dynalab "dfgyosho-u lt" m jisx0208.1983-0
mfs dfjkaibd-unicode.ttf dynalab "dfkaisho-u xb" m jisx0208.1983-0
mfs dfjkailt-unicode.ttf dynalab "dfkaisho-u lt" m jisx0208.1983-0
mfs dfjkaimd-unicode.ttf dynalab "dfkaisho-u md" m jisx0208.1983-0
mfs dfjktrxb-unicode.ttf dynalab "dfkanteiryu-u xb" m jisx0208.1983-0
mfs dfjleimd-unicode.ttf dynalab "dfleisho-u sb" m jisx0208.1983-0
mfs dfjmrgbd-unicode.ttf dynalab "dfmarugothic-u bd" m jisx0208.1983-0
mfs dfjmrglt-unicode.ttf dynalab "dfmarugothic-u lt" m jisx0208.1983-0
mfs dfjmrgmd-unicode.ttf dynalab "dfmarugothic-u md" m jisx0208.1983-0
mfs dfjmrmmd-unicode.ttf dynalab "dfmarumoji-u sl" m jisx0208.1983-0
mfs dfjmrmw7-unicode.ttf dynalab "dfmarumoji-u w7" m jisx0208.1983-0
mfs dfjmrmw9-unicode.ttf dynalab "dfmarumoji-u w9" m jisx0208.1983-0
mfs dfjpop1-unicode.ttf dynalab "dfpop1-u sb" m jisx0208.1983-0
mfs dfjpopw5-unicode.ttf dynalab "dfpop1-u w5" m jisx0208.1983-0
mfs dfjpopw9-unicode.ttf dynalab "dfpop1-u w9" m jisx0208.1983-0
# jisx0208.1983-0
mfs kochi-gothic.ttf misc "kochi gothic" m jisx0208.1983-0
mfs kochi-mincho.ttf misc "kochi mincho" m jisx0208.1983-0
# jisx0208.1983-0
mfs kouzanmouhitu.ttf misc kouzanbrushfont m jisx0208.1983-0
# jisx0208.1983-0
mfs sazanami-gothic.ttf misc "sazanami gothic" m jisx0208.1983-0
mfs sazanami-mincho.ttf misc "sazanami mincho" m jisx0208.1983-0
# jisx0208.1983-0
#mfs ipag.ttf misc ipagothic m jisx0208.1983-0
#mfs ipagp.ttf misc ipapgothic p jisx0208.1983-0
#mfs ipam.ttf misc ipamincho m jisx0208.1983-0
#mfs ipamp.ttf misc ipapmincho p jisx0208.1983-0
mfs ipag.ttf misc ipagothic m jisx0213.2004-0
mfs ipagp.ttf misc ipapgothic p jisx0213.2004-0
mfs ipam.ttf misc ipamincho m jisx0213.2004-0
mfs ipamp.ttf misc ipapmincho p jisx0213.2004-0
# jisx0208.1983-0
#mfs ipamjm.ttf misc ipapmjmincho m jisx0208.1983-0
mfs ipamjm.ttf misc ipapmjmincho m jisx0213.2004-0
- dvdbackup
- vcdimager-2.0.1-slackbuild.tar.gz
- fontforge
- less-382-iso262.tar.gz
tar xvvf less-382.tar.gz chmod -R +w less-382 cd less-382 zcat ../less-382-iso258.patch.gz | patch -p1 zcat ../less-382-iso258-259.patch.gz | patch -p1 zcat ../less-382-iso259-260.patch.gz | patch -p1 zcat ../less-382-iso260-261.patch.gz | patch -p1 zcat ../less-382-iso261-262.patch.gz | patch -p1 ##zcat ../less-382-iso262.ext02.patch.gz | patch -p1 zcat ../less-382-iso262.ext03.patch.gz | patch -p1 CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=implicit-int" ./configure CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=implicit-int" make CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=implicit-int" make install
Canna37p3.diff
*** Makefile.ORG 2024-07-12 23:12:36.912950194 +0900
--- Makefile 2024-07-12 23:14:29.256951565 +0900
***************
*** 290,296 ****
PROJECTROOT = /usr
! CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing
CCOPTIONS =
ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
--- 290,296 ----
PROJECTROOT = /usr
! CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing -Wno-error=implicit-int -Wno-error=implicit-function-declaration -Wno-error=incompatible-pointer-types
CCOPTIONS =
ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
How to build
$ xmkmf -a $ patch -p0 <../Canna37p3.diff $ make canna $ su # make install # make install.man
/etc/rc.d/rc.local
if [ -x /usr/local/canna/sbin/cannaserver ]
then
rm /tmp/.iroha_unix/IROHA
/usr/local/canna/sbin/cannaserver -inet -u bin
echo "Starting cannaserver."
fi
/var/log/CANNA0msgs
touch /var/log/CANNA0msgs chown bin.bin /var/log/CANNA0msgs
/etc/ld.so.conf
/usr/local/canna/lib
kinput-v3.1.diff
*** Makefile.ORG 2024-07-12 23:38:49.433969389 +0900
--- Makefile 2024-07-12 23:42:59.724972445 +0900
***************
*** 169,175 ****
CXXLIB = -lstdc++
! CXXDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing
CXXDEPENDINCLUDES =
CXXEXTRA_DEFINES =
CXXEXTRA_INCLUDES =
--- 169,175 ----
CXXLIB = -lstdc++
! CXXDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing -Wno-error=implicit-function-declaration -Wno-error=implicit-int
CXXDEPENDINCLUDES =
CXXEXTRA_DEFINES =
CXXEXTRA_INCLUDES =
***************
*** 290,296 ****
PROJECTROOT = /usr
! CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing
CCOPTIONS =
ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
--- 290,296 ----
PROJECTROOT = /usr
! CDEBUGFLAGS = -O2 -fno-strength-reduce -fno-strict-aliasing -Wno-error=implicit-function-declaration -Wno-error=implicit-int
CCOPTIONS =
ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
How to build
$ xmkmf -a $ patch -p0 <../kinput-v3.1.diff $ make # make install # make install.man
/usr/X11R6/lib/X11/app-defaults/Kinput2 like following.
*IMProtocol.locales: ja_JP.UTF-8, ja_JP.SJIS, ja_JP.EUC, ja_JP, japanese, japan, ja
~/.xinitrc
kinput2 -kinput +ximp -xim -canna &
*** Makefile.ORG 2024-07-13 19:03:29.710096163 +0900
--- Makefile 2024-07-13 19:09:10.727100326 +0900
***************
*** 9,16 ****
# Keep this list in sync with pyproject.toml includes/artifacts
# intended use: when building a source distribution,
# make pypi-files && python3 -m build -sn .
! pypi-files: AUTHORS Changelog.md LICENSE README.md README.txt supportedsites \
! completions yt-dlp.1 pyproject.toml setup.cfg devscripts/* test/*
.PHONY: all clean clean-all clean-test clean-dist clean-cache \
completions completion-bash completion-fish completion-zsh \
--- 9,18 ----
# Keep this list in sync with pyproject.toml includes/artifacts
# intended use: when building a source distribution,
# make pypi-files && python3 -m build -sn .
! #pypi-files: AUTHORS Changelog.md LICENSE README.md README.txt supportedsites \
! # completions yt-dlp.1 pyproject.toml setup.cfg devscripts/* test/*
! pypi-files: AUTHORS Changelog.md LICENSE README.md supportedsites \
! completions pyproject.toml setup.cfg devscripts/* test/*
.PHONY: all clean clean-all clean-test clean-dist clean-cache \
completions completion-bash completion-fish completion-zsh \
***************
*** 50,60 ****
MARKDOWN != $(MARKDOWN_CMD)
MARKDOWN ?= $(shell $(MARKDOWN_CMD))
! install: lazy-extractors yt-dlp yt-dlp.1 completions
mkdir -p $(DESTDIR)$(BINDIR)
install -m755 yt-dlp $(DESTDIR)$(BINDIR)/yt-dlp
! mkdir -p $(DESTDIR)$(MANDIR)/man1
! install -m644 yt-dlp.1 $(DESTDIR)$(MANDIR)/man1/yt-dlp.1
mkdir -p $(DESTDIR)$(SHAREDIR)/bash-completion/completions
install -m644 completions/bash/yt-dlp $(DESTDIR)$(SHAREDIR)/bash-completion/completions/yt-dlp
mkdir -p $(DESTDIR)$(SHAREDIR)/zsh/site-functions
--- 52,63 ----
MARKDOWN != $(MARKDOWN_CMD)
MARKDOWN ?= $(shell $(MARKDOWN_CMD))
! #install: lazy-extractors yt-dlp yt-dlp.1 completions
! install: lazy-extractors yt-dlp completions
mkdir -p $(DESTDIR)$(BINDIR)
install -m755 yt-dlp $(DESTDIR)$(BINDIR)/yt-dlp
! # mkdir -p $(DESTDIR)$(MANDIR)/man1
! # install -m644 yt-dlp.1 $(DESTDIR)$(MANDIR)/man1/yt-dlp.1
mkdir -p $(DESTDIR)$(SHAREDIR)/bash-completion/completions
install -m644 completions/bash/yt-dlp $(DESTDIR)$(SHAREDIR)/bash-completion/completions/yt-dlp
mkdir -p $(DESTDIR)$(SHAREDIR)/zsh/site-functions
- google-chrome-stable_current_x86_64.rpm(参考)
- w3m-0.5.3.tar.gz
*** ./istream.h.ORG 2012-11-28 12:23:44.903821617 +0900
--- ./istream.h 2012-11-28 12:24:31.368727065 +0900
***************
*** 20,26 ****
typedef struct stream_buffer *StreamBuffer;
! struct file_handle {
FILE *f;
void (*close) ();
};
--- 20,26 ----
typedef struct stream_buffer *StreamBuffer;
! struct File_handle {
FILE *f;
void (*close) ();
};
***************
*** 53,59 ****
struct file_stream {
struct stream_buffer stream;
! struct file_handle *handle;
char type;
char iseos;
int (*read) ();
--- 53,59 ----
struct file_stream {
struct stream_buffer stream;
! struct File_handle *handle;
char type;
char iseos;
int (*read) ();
*** ./istream.c.ORG 2012-11-28 12:23:39.465130387 +0900
--- ./istream.c 2012-11-28 12:24:16.455831711 +0900
***************
*** 22,29 ****
static void basic_close(int *handle);
static int basic_read(int *handle, char *buf, int len);
! static void file_close(struct file_handle *handle);
! static int file_read(struct file_handle *handle, char *buf, int len);
static int str_read(Str handle, char *buf, int len);
--- 22,29 ----
static void basic_close(int *handle);
static int basic_read(int *handle, char *buf, int len);
! static void file_close(struct File_handle *handle);
! static int file_read(struct File_handle *handle, char *buf, int len);
static int str_read(Str handle, char *buf, int len);
***************
*** 114,120 ****
stream = New(union input_stream);
init_base_stream(&stream->base, STREAM_BUF_SIZE);
stream->file.type = IST_FILE;
! stream->file.handle = New(struct file_handle);
stream->file.handle->f = f;
if (closep)
stream->file.handle->close = closep;
--- 114,120 ----
stream = New(union input_stream);
init_base_stream(&stream->base, STREAM_BUF_SIZE);
stream->file.type = IST_FILE;
! stream->file.handle = New(struct File_handle);
stream->file.handle->f = f;
if (closep)
stream->file.handle->close = closep;
***************
*** 638,650 ****
}
static void
! file_close(struct file_handle *handle)
{
handle->close(handle->f);
}
static int
! file_read(struct file_handle *handle, char *buf, int len)
{
return fread(buf, 1, len, handle->f);
}
--- 638,650 ----
}
static void
! file_close(struct File_handle *handle)
{
handle->close(handle->f);
}
static int
! file_read(struct File_handle *handle, char *buf, int len)
{
return fread(buf, 1, len, handle->f);
}
*** ./main.c.ORG 2016-08-01 21:43:32.714706108 +0900
--- ./main.c 2016-08-01 21:45:27.569705061 +0900
***************
*** 833,839 ****
--- 833,844 ----
mySignal(SIGPIPE, SigPipe);
#endif
+ #if 0
orig_GC_warn_proc = GC_set_warn_proc(wrap_GC_warn_proc);
+ #else
+ orig_GC_warn_proc = GC_get_warn_proc();
+ GC_set_warn_proc(wrap_GC_warn_proc);
+ #endif
err_msg = Strnew();
if (load_argc == 0) {
/* no URL specified */
*** ./url.c.ORG 2023-01-08 23:11:48.763189100 +0900
--- ./url.c 2023-01-08 23:12:29.258188644 +0900
***************
*** 268,277 ****
--- 268,279 ----
if (RAND_status())
return;
if ((file = RAND_file_name(buffer, sizeof(buffer)))) {
+ #if 0
#ifdef USE_EGD
if (RAND_egd(file) > 0)
return;
#endif
+ #endif
RAND_load_file(file, -1);
}
if (RAND_status())
How to build
CFLAGS="-Wno-error=implicit-function-declaration -Wno-error=incompatible-pointer-types" ./configure --disable-mouse && make
realesrgan-ncnn-vulkanを利用した動画の変換スクリプト
#! /bin/sh
input="$1"
output="$2"
fps=`ffmpeg -i ${input} 2>&1 | egrep 'Stream.*Video' | sed -e 's/^.* \([0-9\.][0-9\.]*\) fps.*$/\1/'`
rm -f tmp_frames/frame*.jpg
rm -f out_frames/frame*.jpg
ffmpeg -i ${input} -qscale:v 1 -qmin 1 -qmax 1 -vsync 0 tmp_frames/frame%08d.jpg
./realesrgan-ncnn-vulkan -i tmp_frames -o out_frames -n realesr-animevideov3 -s 2 -f jpg
#./realesrgan-ncnn-vulkan -i tmp_frames -o out_frames -n realesrgan-x4plus -s 4 -f jpg
ffmpeg -framerate ${fps} -i out_frames/frame%08d.jpg -i ${input} -map 0:v:0 -map 1:a:0 -c:a copy -c:v libx264 -r ${fps} -pix_fmt yuv420p ${output}
rm -f tmp_frames/frame*.jpg
rm -f out_frames/frame*.jpg
- ffmpeg(libx264とlibfdk-aacを有効にする)
*** ffmpeg.SlackBuild.ORG 2024-08-04 23:00:00.000000000 +0900
--- ffmpeg.SlackBuild 2024-08-04 23:10:38.000000000 +0900
***************
*** 106,112 ****
libglslang="" ; [ "${GLSLANG:-no}" != "no" ] && libglslang="--enable-libglslang"
shaderc="" ; [ "${SHADERC:-yes}" != "no" ] && libshaderc="--enable-libshaderc"
! libx264="" ; [ "${X264:-no}" != "no" ] && libx264="--enable-libx264"
libcelt="" ; [ "${CELT:-no}" != "no" ] && libcelt="--enable-libcelt"
libdc1394="" ; [ "${DC1394:-no}" != "no" ] && libdc1394="--enable-libdc1394"
libgsm="" ; [ "${GSM:-no}" != "no" ] && libgsm="--enable-libgsm"
--- 106,112 ----
libglslang="" ; [ "${GLSLANG:-no}" != "no" ] && libglslang="--enable-libglslang"
shaderc="" ; [ "${SHADERC:-yes}" != "no" ] && libshaderc="--enable-libshaderc"
! libx264="" ; [ "${X264:-yes}" != "no" ] && libx264="--enable-libx264"
libcelt="" ; [ "${CELT:-no}" != "no" ] && libcelt="--enable-libcelt"
libdc1394="" ; [ "${DC1394:-no}" != "no" ] && libdc1394="--enable-libdc1394"
libgsm="" ; [ "${GSM:-no}" != "no" ] && libgsm="--enable-libgsm"
***************
*** 136,142 ****
vapoursynth="" ; [ "${VAPOURSYNTH:-no}" != "no" ] && vapoursynth="--enable-vapoursynth"
opencore_amr="" ; [ "${OPENCORE:-no}" != "no" ] && \
opencore_amr="--enable-libopencore-amrnb --enable-libopencore-amrwb"
! fdk="" ; [ "${FDK_AAC:-no}" != "no" ] && \
{ fdk="--enable-libfdk-aac"; non_free="--enable-nonfree" ; }
decklink="" ; [ "${DECKLINK:-no}" != "no" ] && \
{ decklink="--enable-decklink" ; \
--- 136,142 ----
vapoursynth="" ; [ "${VAPOURSYNTH:-no}" != "no" ] && vapoursynth="--enable-vapoursynth"
opencore_amr="" ; [ "${OPENCORE:-no}" != "no" ] && \
opencore_amr="--enable-libopencore-amrnb --enable-libopencore-amrwb"
! fdk="" ; [ "${FDK_AAC:-yes}" != "no" ] && \
{ fdk="--enable-libfdk-aac"; non_free="--enable-nonfree" ; }
decklink="" ; [ "${DECKLINK:-no}" != "no" ] && \
{ decklink="--enable-decklink" ; \
- audapolis-linux-x86_64-0.3.0_4.rpm
- ReazonSpeech(参考)
$ python3 -m venv venv $ source venv/bin/activate $ pip install --upgrade pip $ pip install Cython $ pip install wheel $ git clone https://github.com/reazon-research/ReazonSpeech $ pip install ReazonSpeech/pkg/nemo-asr $ pip uninstall huggingface_hub $ pip install huggingface-hub==0.23.2 $ pip uninstall numpy $ pip install numpy==1.26.4
$ reazonspeech-nemo-asr HogeHoge.mp3
システム設定
/opt/brother/scanner/brscan4/brsanenetdevice4.cfg
*** ./opt/brother/scanner/brscan4/brsanenetdevice4.cfg.ORG 2024-05-06 17:05:15.931250255 +0900 --- ./opt/brother/scanner/brscan4/brsanenetdevice4.cfg 2024-07-22 22:33:10.883075608 +0900 *************** *** 1,2 **** ! --- 1,2 ---- ! DEVICE=dcp-j552n , "DCP-J552N" , 0x4f9:0x2e3 , IP-ADDRESS=192.168.0.52
/opt/brother/Printers/dcpj552n/lpd/filterdcpj552n
*** ./opt/brother/Printers/dcpj552n/lpd/filterdcpj552n.ORG 2024-05-03 23:29:12.182264882 +0900 --- ./opt/brother/Printers/dcpj552n/lpd/filterdcpj552n 2024-08-11 09:09:08.931587840 +0900 *************** *** 77,84 **** rm -f $PS_TEMP ;; * ) ! A2PS_OP="--output=- -q -1 --no-header --borders no" ! eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP RET=$? ;; esac --- 77,87 ---- rm -f $PS_TEMP ;; * ) ! ## A2PS_OP="--output=- -q -1 --no-header --borders no" ! ## eval cat $INPUT_TEMP | a2ps $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP ! A2PS_OP="" ! #### eval cat $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP ! eval /usr/local/bin/nkf -w $INPUT_TEMP | /usr/local/bin/a2ps-j $A2PS_OP | $PSCONV $PSCONV_OP | $BRCONV $BRCONV_OP RET=$? ;; esac
/usr/share/ghostscript/10.03.1/Resource/Init/cidfmap
*** ./usr/share/ghostscript/10.03.1/Resource/Init/cidfmap.ORG 2024-07-14 21:35:50.412262431 +0900 --- ./usr/share/ghostscript/10.03.1/Resource/Init/cidfmap 2024-07-14 21:36:04.651262605 +0900 *************** *** 113,118 **** --- 113,138 ---- /Adobe-Japan1 /Sazanami-Gothic ; /Adobe-Japan2 /Sazanami-Gothic-JaH ; + % add by m-ito + /Tyukaisyo-Medium << /FileType /TrueType /Path (dfjkaimd.ttf) /CSI [(Japan1) 6] >> ; + /Tyukaisyo-Medium-Unocode << /FileType /TrueType /Path (dfjkaimd-unicode.ttf) /CSI [(Japan1) 6] >> ; + /Tyumarugothic-Medium << /FileType /TrueType /Path (dfjmrgmd.ttf) /CSI [(Japan1) 6] >> ; + /Tyumarugothic-Medium-Unicode << /FileType /TrueType /Path (dfjmrgmd-unicode.ttf) /CSI [(Japan1) 6] >> ; + /Gyosyo-Medium << /FileType /TrueType /Path (dfjgyomd.ttf) /CSI [(Japan1) 6] >> ; + /Gyosyo-Medium-Unicode << /FileType /TrueType /Path (dfjgyomd-unicode.ttf) /CSI [(Japan1) 6] >> ; + /Kanteiryu-Medium << /FileType /TrueType /Path (dfjktrxb.ttf) /CSI [(Japan1) 6] >> ; + /Kanteiryu-Medium-Unicode << /FileType /TrueType /Path (dfjktrxb-unicode.ttf) /CSI [(Japan1) 6] >> ; + /Reisyo-Medium << /FileType /TrueType /Path (dfjleimd.ttf) /CSI [(Japan1) 6] >> ; + /Reisyo-Medium-Unicode << /FileType /TrueType /Path (dfjleimd-unicode.ttf) /CSI [(Japan1) 6] >> ; + /Pop1-Medium << /FileType /TrueType /Path (dfjpop1.ttf) /CSI [(Japan1) 6] >> ; + /Pop1-Medium-Unicode << /FileType /TrueType /Path (dfjpop1-unicode.ttf) /CSI [(Japan1) 6] >> ; + /Marumoji-Medium << /FileType /TrueType /Path (dfjmrmmd.ttf) /CSI [(Japan1) 6] >> ; + /Marumoji-Medium-Unicode << /FileType /TrueType /Path (dfjmrmmd-unicode.ttf) /CSI [(Japan1) 6] >> ; + % + /Kouzanmouhitu-Medium << /FileType /TrueType /Path (kouzanmouhitu.ttf) /CSI [(Japan1) 6] >> ; + %/Eudc << /FileType /TrueType /Path (eudc.ttf) /CSI [(Artifex) (Unicode) 0] >> ; + %/SME << /FileType /TrueType /Path (sazanami-mincho-eudc.ttf) /CSI [(Artifex) (Unicode) 0] >> ; + %% cidfmap.ko %% To enable Korean printing support, install the fonts shown in the example %% here and uncomment the block below:
/usr/share/sendmail/cf/cf/config.mc
*** ./usr/share/sendmail/cf/cf/config.mc.ORG 2024-04-29 23:44:23.006042321 +0900 --- ./usr/share/sendmail/cf/cf/config.mc 2024-04-29 23:53:04.007048681 +0900 *************** *** 14,28 **** OSTYPE(`linux')dnl dnl# dnl# You will need to create the certificates below with OpenSSL first: ! define(`confCACERT_PATH', `/etc/mail/certs/') ! define(`confCACERT', `/etc/mail/certs/CA.cert.pem') ! define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem') ! define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem') dnl# These settings help protect against people verifying email addresses dnl# at your site in order to send you email that you probably don't want: define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl dnl# Uncomment the line below to send outgoing mail through an external server: dnl define(`SMART_HOST',`mailserver.example.com') dnl# No timeout for ident: define(`confTO_IDENT', `0')dnl dnl# Enable the line below to use smrsh to restrict what sendmail can run: --- 14,29 ---- OSTYPE(`linux')dnl dnl# dnl# You will need to create the certificates below with OpenSSL first: ! dnl##define(`confCACERT_PATH', `/etc/mail/certs/') ! dnl##define(`confCACERT', `/etc/mail/certs/CA.cert.pem') ! dnl##define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem') ! dnl##define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem') dnl# These settings help protect against people verifying email addresses dnl# at your site in order to send you email that you probably don't want: define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl dnl# Uncomment the line below to send outgoing mail through an external server: dnl define(`SMART_HOST',`mailserver.example.com') + define(`SMART_HOST',`smtp:lib100.artie.or.jp') dnl# No timeout for ident: define(`confTO_IDENT', `0')dnl dnl# Enable the line below to use smrsh to restrict what sendmail can run: *************** *** 34,46 **** FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl ! FEATURE(`blacklist_recipients')dnl FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl FEATURE(`always_add_domain')dnl FEATURE(`redirect')dnl FEATURE(`no_default_msa')dnl dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail: dnl FEATURE(`accept_unresolvable_domains')dnl EXPOSED_USER(`root')dnl dnl# Also accept mail for localhost.localdomain: LOCAL_DOMAIN(`localhost.localdomain')dnl --- 35,49 ---- FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl ! dnl##FEATURE(`blacklist_recipients')dnl ! FEATURE(`blocklist_recipients')dnl FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl FEATURE(`always_add_domain')dnl FEATURE(`redirect')dnl FEATURE(`no_default_msa')dnl dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail: dnl FEATURE(`accept_unresolvable_domains')dnl + FEATURE(`accept_unresolvable_domains')dnl EXPOSED_USER(`root')dnl dnl# Also accept mail for localhost.localdomain: LOCAL_DOMAIN(`localhost.localdomain')dnl *************** *** 48,61 **** MAILER(smtp)dnl MAILER(procmail)dnl dnl# Allow SASL authentication/relaying: ! define(`confAUTH_OPTIONS', `A p y')dnl ! define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl ! TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl ! DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl dnl# Daemon options after M= below that might need to be changed are: dnl# s (allow SSL, not only TLS) dnl# a (require authentication) ! DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Esa')dnl ! LOCAL_CONFIG dnl# Do not allow the weak SSLv2: ! O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL --- 51,64 ---- MAILER(smtp)dnl MAILER(procmail)dnl dnl# Allow SASL authentication/relaying: ! dnl##define(`confAUTH_OPTIONS', `A p y')dnl ! dnl##define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl ! dnl##TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl ! dnl##DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl dnl# Daemon options after M= below that might need to be changed are: dnl# s (allow SSL, not only TLS) dnl# a (require authentication) ! dnl##DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Esa')dnl ! dnl##LOCAL_CONFIG dnl# Do not allow the weak SSLv2: ! dnl##O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL
/usr/local/etc/freshclam.conf
*** ./usr/local/etc/freshclam.conf.ORG 2024-04-30 00:55:24.980094347 +0900 --- ./usr/local/etc/freshclam.conf 2024-04-30 00:56:12.667094930 +0900 *************** *** 5,16 **** # Comment or remove the line below. ! Example # Path to the database directory. # WARNING: It must match clamd.conf's directive! # Default: hardcoded (depends on installation options) #DatabaseDirectory /var/lib/clamav # Path to the log file (make sure it has proper permissions) # Default: disabled --- 5,17 ---- # Comment or remove the line below. ! ##Example # Path to the database directory. # WARNING: It must match clamd.conf's directive! # Default: hardcoded (depends on installation options) #DatabaseDirectory /var/lib/clamav + DatabaseDirectory /usr/local/share/clamav # Path to the log file (make sure it has proper permissions) # Default: disabled
/usr/local/etc/clamd.conf
*** ./usr/local/etc/clamd.conf.ORG 2024-04-30 00:53:24.927092882 +0900 --- ./usr/local/etc/clamd.conf 2024-04-30 00:55:00.537094049 +0900 *************** *** 5,11 **** # Comment or remove the line below. ! Example # Uncomment this option to enable logging. # LogFile must be writable for the user running daemon. --- 5,11 ---- # Comment or remove the line below. ! ##Example # Uncomment this option to enable logging. # LogFile must be writable for the user running daemon. *************** *** 83,88 **** --- 83,89 ---- # Path to the database directory. # Default: hardcoded (depends on installation options) #DatabaseDirectory /var/lib/clamav + DatabaseDirectory /usr/local/share/clamav # Only load the official signatures published by the ClamAV project. # Default: no *************** *** 100,105 **** --- 101,107 ---- # Default: disabled (must be specified by a user) #LocalSocket /run/clamav/clamd.sock #LocalSocket /tmp/clamd.sock + LocalSocket /tmp/clamd.sock # Sets the group ownership on the unix socket. # Default: disabled (the primary group of the user running clamd) *************** *** 116,121 **** --- 118,124 ---- # TCP port address. # Default: no #TCPSocket 3310 + TCPSocket 3310 # TCP address. # By default we bind to INADDR_ANY, probably not wise. *************** *** 124,129 **** --- 127,133 ---- # times if you want to listen on multiple IPs. IPv6 is now supported. # Default: no #TCPAddr localhost + TCPAddr localhost # Maximum length the queue of pending connections may grow to. # Default: 200
/etc/fstab
*** ./etc/fstab.ORG 2024-05-19 10:41:23.292003714 +0900 --- ./etc/fstab 2024-05-19 10:43:09.653005012 +0900 *************** *** 1,5 **** /dev/nvme0n1p2 swap swap defaults 0 0 ! /dev/nvme0n1p3 / ext4 defaults 1 1 /dev/nvme0n1p1 /boot/efi vfat defaults 1 0 #/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0 /dev/fd0 /mnt/floppy auto noauto,owner 0 0 --- 1,5 ---- /dev/nvme0n1p2 swap swap defaults 0 0 ! /dev/nvme0n1p3 / ext4 defaults,noatime 1 1 /dev/nvme0n1p1 /boot/efi vfat defaults 1 0 #/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0 /dev/fd0 /mnt/floppy auto noauto,owner 0 0
/etc/exports
*** ./etc/exports.ORG 2024-05-01 22:31:40.360597620 +0900 --- ./etc/exports 2024-05-01 22:32:08.650597965 +0900 *************** *** 1,4 **** --- 1,6 ---- # See exports(5) for a description. # This file contains a list of all directories exported to other computers. # It is used by rpc.nfsd and rpc.mountd. + / 192.168.0.0/255.255.255.0(ro,no_root_squash,no_subtree_check,sync) + #/mnt/export 192.168.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,sync)
/etc/sane.d/dll.conf
*** ./etc/sane.d/dll.conf.ORG 2024-05-06 17:07:45.526252081 +0900 --- ./etc/sane.d/dll.conf 2024-05-06 17:08:22.916252538 +0900 *************** *** 7,12 **** --- 7,13 ---- # The next line enables the network backend; comment it out if you don't # need to use a remote SANE scanner over the network -- see sane-net(5) # and saned(8) for details. + brother4 net abaton agfafocus
/etc/sane.d/net.conf
*** ./etc/sane.d/net.conf.ORG 2024-05-06 17:06:59.263251516 +0900 --- ./etc/sane.d/net.conf 2024-05-06 17:07:28.824251877 +0900 *************** *** 12,14 **** --- 12,16 ---- # directly or through the net backend. Going through the net backend # may be necessary to access devices that need special privileges. # localhost + + 192.168.0.52
/etc/elogind/logind.conf.d/LidSwitch.conf
*** ./etc/elogind/logind.conf.d/LidSwitch.conf.ORG 2024-05-01 22:41:10.391604578 +0900 --- ./etc/elogind/logind.conf.d/LidSwitch.conf 2024-08-11 09:15:31.661592512 +0900 *************** *** 0 **** --- 1,51 ---- + # This file is part of elogind. + # + # elogind is free software; you can redistribute it and/or modify it under the + # terms of the GNU Lesser General Public License as published by the Free + # Software Foundation; either version 2.1 of the License, or (at your option) + # any later version. + # + # Entries in this file show the compile time defaults. Local configuration + # should be created by either modifying this file (or a copy of it placed in + # /etc/ if the original file is shipped in /usr/), or by creating "drop-ins" in + # the /etc/elogind/logind.conf.d/ directory. The latter is generally + # recommended. Defaults can be restored by simply deleting the main + # configuration file and all drop-ins located in /etc/. + # + # See logind.conf(5) for details. + + [Login] + #KillUserProcesses=no + #KillOnlyUsers= + #KillExcludeUsers=root + #InhibitDelayMaxSec=5 + #UserStopDelaySec=10 + #HandlePowerKey=poweroff + #HandlePowerKeyLongPress=ignore + #HandleRebootKey=reboot + #HandleRebootKeyLongPress=poweroff + #HandleSuspendKey=suspend + #HandleSuspendKeyLongPress=hibernate + #HandleHibernateKey=hibernate + #HandleHibernateKeyLongPress=ignore + # + # Don't sleep by closing LCD panel + # + HandleLidSwitch=ignore + # + #HandleLidSwitchExternalPower=suspend + #HandleLidSwitchDocked=ignore + #PowerKeyIgnoreInhibited=no + #SuspendKeyIgnoreInhibited=no + #HibernateKeyIgnoreInhibited=no + #LidSwitchIgnoreInhibited=yes + #RebootKeyIgnoreInhibited=no + #HoldoffTimeoutSec=30s + #IdleAction=ignore + #IdleActionSec=30min + #RuntimeDirectorySize=10% + #RuntimeDirectoryInodesMax= + #RemoveIPC=yes + #InhibitorsMax=8192 + #SessionsMax=8192 + #StopIdleSessionSec=infinity
/etc/modprobe.d/em28xx.conf
*** ./etc/modprobe.d/em28xx.conf.ORG 2024-07-07 19:24:45.886509874 +0900 --- ./etc/modprobe.d/em28xx.conf 2024-07-07 19:24:25.327509623 +0900 *************** *** 0 **** --- 1,2 ---- + install em28xx /sbin/modprobe --ignore-install em28xx card=72; /bin/echo "117f 5207" > /sys/bus/usb/drivers/em28xx/new_id +
/etc/rc.d/rc.local
*** ./etc/rc.d/rc.local.ORG 2024-05-01 22:27:21.241594457 +0900 --- ./etc/rc.d/rc.local 2024-07-12 23:21:36.620956782 +0900 *************** *** 7,9 **** --- 7,64 ---- # make an /etc/rc.d/rc.local_shutdown script and put those # commands in there. + if [ -x /usr/bin/rm ] + then + /usr/bin/rm -fr /tmp/*.lock + for i in `find /tmp -ctime +10 | egrep '^/tmp/'` + do + /usr/bin/rm -fr $i + done + echo "Clean /tmp." + fi + + #if [ -x /sbin/route ] + #then + # /sbin/route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.0.10 + #fi + + #if [ -x /usr/bin/sensors ] + #then + # /sbin/modprobe coretemp + # /usr/bin/sensors -s + #fi + + if [ -x /usr/sbin/pcscd ] + then + /etc/rc.d/rc.pcscd start + echo "Starting pcscd." + fi + + if [ -x /usr/sbin/alsactl ] + then + /usr/sbin/alsactl restore + echo "Restore alsa setting." + fi + + if [ -x /usr/local/canna/sbin/cannaserver ] + then + rm /tmp/.iroha_unix/IROHA + /usr/local/canna/sbin/cannaserver -inet -u bin + echo "Starting cannaserver." + fi + + if [ -x /usr/local/sbin/clamd ] + then + /usr/local/sbin/clamd & + echo "Starting clamd." + fi + + if [ -x /usr/bin/rsync ] + then + /usr/bin/rsync --daemon --config=/etc/rsyncd.conf + fi + + #if [ -x /sbin/sysctl ] + #then + # /sbin/sysctl --system -e + #fi
/etc/rc.d/rc.inet1.conf
*** ./etc/rc.d/rc.inet1.conf.ORG 2024-04-29 09:40:59.169002907 +0900 --- ./etc/rc.d/rc.inet1.conf 2024-04-29 10:26:02.407002458 +0900 *************** *** 18,24 **** # ============================================================================= # IPv4 config options for eth0: ! IPADDRS[0]="192.168.0.3/24" USE_DHCP[0]="" # IPv6 config options for eth0: IP6ADDRS[0]="" --- 18,25 ---- # ============================================================================= # IPv4 config options for eth0: ! #IPADDRS[0]="192.168.0.3/24" ! IPADDRS[0]="" USE_DHCP[0]="" # IPv6 config options for eth0: IP6ADDRS[0]="" *************** *** 166,171 **** --- 167,177 ---- #WLAN_WPA[4]="wpa_supplicant" #WLAN_WPADRIVER[4]="wext" #WLAN_WPAWAIT[4]=30 + IFNAME[4]="wlan0" + IPADDRS[4]="192.168.0.3" + WLAN_WPA[4]="wpa_supplicant" + #WLAN_WPADRIVER[4]="wext" + WLAN_WPADRIVER[4]="nl80211" # =============================================================================
/etc/rsyncd.conf
*** ./etc/rsyncd.conf.ORG 2024-05-01 22:38:52.097602890 +0900 --- ./etc/rsyncd.conf 2024-05-01 22:54:59.583008478 +0900 *************** *** 0 **** --- 1,8 ---- + uid = root + gid = root + [root_partition] + comment = lifebook1 root partition + path = / + read only = true + hosts allow = 192.168.0.100 + hosts deny = *
/etc/httpd/httpd.conf
*** ./etc/httpd/httpd.conf.ORG 2024-06-20 23:28:37.410702067 +0900
--- ./etc/httpd/httpd.conf 2024-06-20 23:52:44.817719736 +0900
***************
*** 83,89 ****
--- 83,93 ----
LoadModule access_compat_module lib64/httpd/modules/mod_access_compat.so
LoadModule auth_basic_module lib64/httpd/modules/mod_auth_basic.so
#LoadModule auth_form_module lib64/httpd/modules/mod_auth_form.so
+
+ # by m-ito
#LoadModule auth_digest_module lib64/httpd/modules/mod_auth_digest.so
+ LoadModule auth_digest_module lib64/httpd/modules/mod_auth_digest.so
+
#LoadModule allowmethods_module lib64/httpd/modules/mod_allowmethods.so
#LoadModule file_cache_module lib64/httpd/modules/mod_file_cache.so
#LoadModule cache_module lib64/httpd/modules/mod_cache.so
***************
*** 104,110 ****
--- 108,118 ----
LoadModule reqtimeout_module lib64/httpd/modules/mod_reqtimeout.so
#LoadModule ext_filter_module lib64/httpd/modules/mod_ext_filter.so
#LoadModule request_module lib64/httpd/modules/mod_request.so
+
+ # by m-ito
#LoadModule include_module lib64/httpd/modules/mod_include.so
+ LoadModule include_module lib64/httpd/modules/mod_include.so
+
LoadModule filter_module lib64/httpd/modules/mod_filter.so
#LoadModule reflector_module lib64/httpd/modules/mod_reflector.so
#LoadModule substitute_module lib64/httpd/modules/mod_substitute.so
***************
*** 166,175 ****
--- 174,187 ----
#LoadModule asis_module lib64/httpd/modules/mod_asis.so
#LoadModule info_module lib64/httpd/modules/mod_info.so
<IfModule !mpm_prefork_module>
+ # by m-ito
#LoadModule cgid_module lib64/httpd/modules/mod_cgid.so
+ LoadModule cgid_module lib64/httpd/modules/mod_cgid.so
</IfModule>
<IfModule mpm_prefork_module>
+ # by m-ito
#LoadModule cgi_module lib64/httpd/modules/mod_cgi.so
+ LoadModule cgi_module lib64/httpd/modules/mod_cgi.so
</IfModule>
#LoadModule dav_fs_module lib64/httpd/modules/mod_dav_fs.so
#LoadModule dav_lock_module lib64/httpd/modules/mod_dav_lock.so
***************
*** 178,184 ****
--- 190,200 ----
LoadModule dir_module lib64/httpd/modules/mod_dir.so
#LoadModule actions_module lib64/httpd/modules/mod_actions.so
#LoadModule speling_module lib64/httpd/modules/mod_speling.so
+
+ # by m-ito
#LoadModule userdir_module lib64/httpd/modules/mod_userdir.so
+ LoadModule userdir_module lib64/httpd/modules/mod_userdir.so
+
LoadModule alias_module lib64/httpd/modules/mod_alias.so
#LoadModule rewrite_module lib64/httpd/modules/mod_rewrite.so
***************
*** 427,433 ****
--- 443,451 ----
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
+ # by m-ito
#AddHandler cgi-script .cgi
+ AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
***************
*** 438,445 ****
--- 456,466 ----
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
+ # by m-ito
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
+ AddType text/html .shtml
+ AddOutputFilter INCLUDES .shtml
</IfModule>
#
***************
*** 499,505 ****
--- 520,528 ----
#Include /etc/httpd/extra/httpd-languages.conf
# User home directories
+ # by m-ito
#Include /etc/httpd/extra/httpd-userdir.conf
+ Include /etc/httpd/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include /etc/httpd/extra/httpd-info.conf
/etc/httpd/extra/httpd-userdir.conf
*** ./etc/httpd/extra/httpd-userdir.conf.ORG 2024-06-20 23:29:09.260702456 +0900
--- ./etc/httpd/extra/httpd-userdir.conf 2024-06-20 23:31:40.717704305 +0900
***************
*** 14,21 ****
# for a site where these directories are restricted to read-only.
#
<Directory "/home/*/public_html">
! AllowOverride FileInfo AuthConfig Limit Indexes
! Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
Require method GET POST OPTIONS
</Directory>
--- 14,24 ----
# for a site where these directories are restricted to read-only.
#
<Directory "/home/*/public_html">
! # by m-ito
! # AllowOverride FileInfo AuthConfig Limit Indexes
! # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
! AllowOverride All
! Options Includes FollowSymlinks ExecCGI
Require method GET POST OPTIONS
</Directory>
/etc/inittab
*** ./etc/inittab.ORG 2024-04-29 09:26:04.083000538 +0900 --- ./etc/inittab 2024-05-01 23:47:54.472001995 +0900 *************** *** 22,28 **** # 6 = reboot # Default runlevel. (Do not set to 0 or 6) ! id:3:initdefault: # System initialization (runs when system boots). si:S:sysinit:/etc/rc.d/rc.S --- 22,29 ---- # 6 = reboot # Default runlevel. (Do not set to 0 or 6) ! #id:3:initdefault: ! id:4:initdefault: # System initialization (runs when system boots). si:S:sysinit:/etc/rc.d/rc.S *************** *** 34,40 **** rc:2345:wait:/etc/rc.d/rc.M # What to do at the "Three Finger Salute". ! ca::ctrlaltdel:/sbin/shutdown -t5 -r now # Runlevel 0 halts the system. l0:0:wait:/etc/rc.d/rc.0 --- 35,42 ---- rc:2345:wait:/etc/rc.d/rc.M # What to do at the "Three Finger Salute". ! #ca::ctrlaltdel:/sbin/shutdown -t5 -r now ! ca::ctrlaltdel:/sbin/shutdown -h now # Runlevel 0 halts the system. l0:0:wait:/etc/rc.d/rc.0
/etc/passwd
*** ./etc/passwd.ORG 2024-05-05 17:32:58.979783410 +0900 --- ./etc/passwd 2024-05-05 23:32:22.840046641 +0900 *************** *** 43,45 **** --- 43,48 ---- ldap:x:330:330:OpenLDAP server:/var/lib/openldap:/bin/false openvpn:x:443:443:User for OpenVPN:/:/bin/false overflowuid:x:65534:65534:System UID overflow:/:/bin/false + m-ito:x:503:503::/home/m-ito:/bin/bash + clamav:x:513:513:clamav anti virus:/usr/local/share/clamav:/bin/false + pcscd:x:257:257::/var/run/pcscd:/bin/false
/etc/group
*** ./etc/group.ORG 2024-05-05 17:33:15.206783608 +0900 --- ./etc/group 2024-05-05 23:31:36.651046077 +0900 *************** *** 8,22 **** lp:x:7:lp mem:x:8: kmem:x:9: ! wheel:x:10:root floppy:x:11: mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: dialout:x:16:uucp ! audio:x:17:root,pulse ! video:x:18:sddm cdrom:x:19:m-ito games:x:20: slocate:x:21: --- 8,22 ---- lp:x:7:lp mem:x:8: kmem:x:9: ! wheel:x:10:root,m-ito,apache floppy:x:11: mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: dialout:x:16:uucp ! audio:x:17:root,pulse,m-ito ! video:x:18:sddm,m-ito,apache cdrom:x:19:m-ito games:x:20: slocate:x:21: *************** *** 65,67 **** --- 65,70 ---- ldap:x:330: openvpn:x:443: overflowgid:x:65534: + m-ito:x:503:apache + clamav:x:513: + pcscd:x:257:
/etc/ld.so.conf
*** ./etc/ld.so.conf.ORG 2024-07-12 23:23:14.139957972 +0900 --- ./etc/ld.so.conf 2024-07-12 23:23:41.409958305 +0900 *************** *** 2,5 **** --- 2,6 ---- /lib64 /usr/lib64 /usr/local/lib64 + /usr/local/canna/lib /usr/x86_64-slackware-linux/lib64
/etc/X11/app-defaults/Kinput2
*** ./etc/X11/app-defaults/Kinput2.ORG 2024-07-12 23:53:05.827979844 +0900 --- ./etc/X11/app-defaults/Kinput2 2024-07-12 23:55:19.242981472 +0900 *************** *** 96,102 **** ! XimpProtocol *XimpProtocol.ForceDefaultServer: true ! X Input Method Protocol ! *IMProtocol.locales: ja_JP.SJIS, ja_JP.EUC, ja_JP, japanese, japan, ja ! common to XimpProtocol and IMProtocol *defaultFontList: -misc-fixed-medium-r-normal--14-*-*-*-c-* *ConversionStartKeys: \ --- 96,102 ---- ! XimpProtocol *XimpProtocol.ForceDefaultServer: true ! X Input Method Protocol ! *IMProtocol.locales: ja_JP.UTF-8, ja_JP.SJIS, ja_JP.EUC, ja_JP, japanese, japan, ja ! common to XimpProtocol and IMProtocol *defaultFontList: -misc-fixed-medium-r-normal--14-*-*-*-c-* *ConversionStartKeys: \
/etc/X11/xorg.conf.d/90-keyboard-layout.conf
*** ./etc/X11/xorg.conf.d/90-keyboard-layout.conf.ORG 2024-04-29 10:38:31.587008796 +0900 --- ./etc/X11/xorg.conf.d/90-keyboard-layout.conf 2024-04-29 10:38:31.608008796 +0900 *************** *** 0 **** --- 1,46 ---- + # + # cp /usr/share/X11/xorg.conf.d/90-keyboard-layout.conf /etc/X11/xorg.conf.d/ + # + Section "InputClass" + Identifier "keyboard-all" + MatchIsKeyboard "on" + MatchDevicePath "/dev/input/event*" + Driver "evdev" + ## Option "XkbLayout" "us" + Option "XkbLayout" "jp" + #Option "XkbVariant" "" + ## Option "XkbOptions" "terminate:ctrl_alt_bksp" + Option "XkbOptions" "terminate:ctrl_alt_bksp,ctrl:nocaps" + EndSection + + # READ THIS FOR CUSTOM KEYBOARD INFORMATION + # + # If you want to add a custom model/layout/variant to X, you will need to COPY + # this file to /etc/X11/xorg.conf.d/ and edit that copy. After editing it to + # suit, you will need to restart X. + # + # Here's an example of the lines from above: + # + # Section "InputClass" + # Identifier "keyboard-all" + # MatchIsKeyboard "on" + # MatchDevicePath "/dev/input/event*" + # Driver "evdev" + # Option "XkbLayout" "us" + # Option "XkbVariant" "intl" + # Option "XkbOptions" "compose:rwin,terminate:ctrl_alt_bksp" + # EndSection + # + # Many desktop environments, including KDE and Xfce, have their own methods to + # configure keyboard layouts and such if you'd like to use them. + # + # If you prefer to use the "old" way of configuring keyboards (without input + # device hotplugging), then you'll need to add the following lines to the + # ServerFlags section of /etc/X11/xorg.conf: + # Option "AllowEmptyInput" "false" + # Option "AutoAddDevices" "false" + # Option "AutoEnableDevices" "false" + # Alternatively, you can break this up into separate "stubs" in the xorg.conf.d/ + # directory, but that's your call. Assuming you elect to keep a monolithic + # /etc/X11/xorg.conf file, you can now edit the Keyboard section as usual. +
/etc/sudoers
*** ./etc/sudoers.ORG 2024-05-05 23:33:57.562047797 +0900 --- ./etc/sudoers 2024-05-05 23:34:16.917048033 +0900 *************** *** 108,114 **** # %wheel ALL=(ALL:ALL) ALL ## Same thing without a password ! # %wheel ALL=(ALL:ALL) NOPASSWD: ALL ## Uncomment to allow members of group sudo to execute any command # %sudo ALL=(ALL:ALL) ALL --- 108,114 ---- # %wheel ALL=(ALL:ALL) ALL ## Same thing without a password ! %wheel ALL=(ALL:ALL) NOPASSWD: ALL ## Uncomment to allow members of group sudo to execute any command # %sudo ALL=(ALL:ALL) ALL
/etc/wpa_supplicant.conf
*** ./etc/wpa_supplicant.conf.ORG 2024-04-29 09:45:20.568006098 +0900
--- ./etc/wpa_supplicant.conf 2024-04-29 10:21:30.306001334 +0900
***************
*** 1,2 ****
--- 1,12 ----
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=root
+ network={
+ scan_ssid=1
+ ssid="YOUR_SSID"
+ proto=RSN WPA
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ key_mgmt=WPA-PSK WPA-EAP
+ #psk="YOUR_PSK"
+ # wpa_passphrase YOUR_SSID YOUR_PSK
+ psk=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ }
/etc/slackpkg/mirrors
*** ./etc/slackpkg/mirrors.ORG 2024-05-01 23:26:43.716031722 +0900 --- ./etc/slackpkg/mirrors 2024-05-01 23:27:22.569032196 +0900 *************** *** 189,196 **** #---------------------------------------------------------------- # Slackware64-current #---------------------------------------------------------------- # USE MIRRORS.SLACKWARE.COM (DO NOT USE FTP - ONLY HTTP FINDS A NEARBY MIRROR) ! # https://mirrors.slackware.com/slackware/slackware64-current/ # # # Here are some individual mirrors that can be used instead of the --- 189,197 ---- #---------------------------------------------------------------- # Slackware64-current #---------------------------------------------------------------- + https://mirror.slackware.jp/slackware/slackware64-current/ # USE MIRRORS.SLACKWARE.COM (DO NOT USE FTP - ONLY HTTP FINDS A NEARBY MIRROR) ! #https://mirrors.slackware.com/slackware/slackware64-current/ # # # Here are some individual mirrors that can be used instead of the *************** *** 275,283 **** # http://ba.mirror.garr.it/mirrors/Slackware/slackware64-current/ # JAPAN (JP) # ftp://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/ ! # http://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/ # ftp://riksun.riken.go.jp/Linux/slackware/slackware64-current/ ! # http://riksun.riken.go.jp/Linux/slackware/slackware64-current/ # LITHUANIA (LT) # http://mirrors.atviras.lt/slackware/slackware64-current/ # https://mirrors.atviras.lt/slackware/slackware64-current/ --- 276,284 ---- # http://ba.mirror.garr.it/mirrors/Slackware/slackware64-current/ # JAPAN (JP) # ftp://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/ ! ##http://ftp.nara.wide.ad.jp/pub/Linux/slackware/slackware64-current/ # ftp://riksun.riken.go.jp/Linux/slackware/slackware64-current/ ! ##http://riksun.riken.go.jp/Linux/slackware/slackware64-current/ # LITHUANIA (LT) # http://mirrors.atviras.lt/slackware/slackware64-current/ # https://mirrors.atviras.lt/slackware/slackware64-current/
/etc/slackpkg/blacklist
*** ./etc/slackpkg/blacklist.ORG 2024-04-29 22:44:26.260257721 +0900 --- ./etc/slackpkg/blacklist 2024-08-14 10:39:19.989079565 +0900 *************** *** 35,41 **** #kernel-generic.* #kernel-huge.* #kernel-modules.* ! #kernel-source # # This one will blacklist all SBo packages: ! #[0-9]+_SBo --- 35,67 ---- #kernel-generic.* #kernel-huge.* #kernel-modules.* ! #kernel-source.* # # This one will blacklist all SBo packages: ! [0-9]+_SBo ! ! # add temorarily ! # git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git ! #kernel-firmware.* ! #kernel-headers.* ! ! # Slackware package, but original configuration ! ffmpeg-.* ! ! # Slackware package, but removed ! postfix.* ! ! # Slackware Extra package ! sendmail.* ! ! # Non slackware packages ! dcpj552n.* ! brother-udev-rule-type1.* ! brscan-skey.* ! brscan4.* ! libobasis7.6.* ! libreoffice7.6.* ! libspiro.* ! libuninameslist.* ! fontforge.* ! audapolis.*
/boot/efi/EFI/Slackware/elilo.conf
*** ./boot/efi/EFI/Slackware/elilo.conf.ORG 2024-05-03 17:12:40.000000000 +0900
--- ./boot/efi/EFI/Slackware/elilo.conf 2024-07-15 00:13:44.000000000 +0900
***************
*** 1,9 ****
chooser=simple
! delay=1
! timeout=1
#
image=vmlinuz
label=vmlinuz
initrd=initrd.gz
read-only
append="root=/dev/nvme0n1p3 vga=normal ro"
--- 1,18 ----
chooser=simple
! delay=50
! timeout=50
! #
! prompt
! default=vmlinuz
#
image=vmlinuz
label=vmlinuz
initrd=initrd.gz
read-only
+ append="root=/dev/nvme0n1p3 vga=normal mitigations=off ro"
+ #
+ image=vmlinuz.ORG
+ label=vmlinuz.ORG
+ initrd=initrd.ORG.gz
+ read-only
append="root=/dev/nvme0n1p3 vga=normal ro"
システムアップデート
/root/update_system.sh
#! /bin/sh
slackpkg -batch=on -default_answer=y update </dev/null
slackpkg -batch=on -default_answer=y install-new </dev/null
slackpkg -batch=on -default_answer=y upgrade-all </dev/null
slackpkg -batch=on -default_answer=y clean-system </dev/null
echo '=== check .new files start ==='
/usr/bin/run-parts /etc/cron.daily
for i in `locate '*\.new' | egrep -v '^/home/|^/usr/local/' | egrep 'new$'`
do
org=`echo $i | sed -e 's/\.new$//'`
if [ -r ${org} ]
then
diff -c ${org} $i 2>&1
fi
done
echo '=== check .new files end ==='
##mod_ver=`cd /lib/modules && /usr/bin/ls -r1 | egrep -v '\.BAK$' | head -1`
mod_ver=`cd /lib/modules && /usr/bin/ls -t1 | egrep -v '\.BAK$' | head -1`
kern_ver=`uname -r`
if [ -r /lib/modules/${kern_ver}/misc/vmnet.ko ]
then
:
else
# git clone -b workstation-17.5.1 https://github.com/mkubecek/vmware-host-modules.git
cd vmware-host-modules && make && make install
sync;sync;sync
reboot
fi
if [ "X${mod_ver}" = "X${kern_ver}" ]
then
:
else
# cp /boot/initrd.gz /boot/efi/EFI/Slackware/initrd.gz
cp /boot/vmlinuz /boot/efi/EFI/Slackware/vmlinuz
sync;sync;sync
reboot
fi
# deb s
#uname -a
#wget --no-check-certificate https://mirrors.slackware.com/slackware/slackware64-current/slackware64/a/ -O - 2>/dev/null |
# tr '<>' '\n\n' |
# egrep "^kernel-.*txz$"
ffmpeg -h 2>&1 | head -1
wget --no-check-certificate https://mirrors.slackware.com/slackware/slackware64-current/slackware64/l/ -O - 2>/dev/null |
tr '<>' '\n\n' |
egrep "^ffmpeg-.*txz$"
gs --version
ls /var/log/packages/ghostscript-*|egrep -v font
# deb e
[ツッコミを入れる]